Water-Wash Resin 2.0
Manufacturer: Anycubic
Type: Water-Wash Resin 2.0
Water-Wash Resin 2.0 is a Water-Wash Resin 2.0 resin manufactured by Anycubic, leading manufacturer of affordable 3D printers and high-quality resins. With 18% elongation at break, this resin is designed for applications requiring tough, impact-resistant applications. available in Grey, White, Black, Clear, Translucent Green, Beige, priced at approximately $24.99.
Key Properties
- Elongation at Break: 18% — moderate flexibility
- Viscosity: 190 mPa·s — low — easy to pour and clean
- Impact Resistance: 108 J/m — excellent impact toughness
Best Applications for Water-Wash Resin 2.0
- Tough enclosures, protective covers, and impact-resistant parts
Technical Specifications
Technical data for Water-Wash Resin 2.0| Resin Type | Water-Wash Resin 2.0 |
|---|
| Shore Hardness | 82-85 |
|---|
| Viscosity | 190-230 mPa·s |
|---|
| Solid Density | 1.07-1.09 g/cm³ |
|---|
| Colour Options | Grey, White, Black, Clear, Translucent Green, Beige |
|---|
| Tensile Stress at Break | 38-43 MPa |
|---|
| Tensile Strength | 38-43 MPa |
|---|
| Young's Modulus | 1100-1300 MPa |
|---|
| Elongation at Break | 18-22% |
|---|
| Flexural Modulus | 2300-3000 MPa |
|---|
| Flexural Stress at Break | 48-60 MPa |
|---|
| Flexural Strength | 48-60 MPa |
|---|
| Izod Impact (Notched) | 108 J/m |
|---|
| Price | $24.99 |
|---|
Handling & Printing Notes
With a viscosity of 190 mPa·s, this resin pours easily and requires minimal heating. The solid density of 1.07 g/cm³ is typical for photopolymer resins, resulting in lighter cured parts. Always refer to the official technical datasheet from Anycubic for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About Anycubic
Leading manufacturer of affordable 3D printers and high-quality resins. Known for user-friendly products and excellent customer support.
Headquarters: Shenzhen, China
View all resins from Anycubic →
Frequently Asked Questions
What is Water-Wash Resin 2.0 used for?
Water-Wash Resin 2.0 is primarily suited for tough, impact-resistant applications. making it a good choice for demanding 3D printing applications and is available in Grey, White, Black, Clear, Translucent Green, Beige.
How much does Water-Wash Resin 2.0 cost?
Water-Wash Resin 2.0 is priced at approximately $24.99. Check Anycubic's website or authorised retailers for current pricing and availability.
← Browse all resins |
All resins from Anycubic →