eResin-PLA
Manufacturer: eSUN
Type: eResin-PLA
eResin-PLA is a eResin-PLA resin manufactured by eSUN, major manufacturer of 3D printing filaments and UV resins with broad material range. With 24% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. priced at approximately $19.99.
Key Properties
- Elongation at Break: 24% — moderate flexibility
- Viscosity: 100 mPa·s — low — easy to pour and clean
- Impact Resistance: 27 J/m — moderate impact toughness
Best Applications for eResin-PLA
- General-purpose SLA/MSLA 3D printing projects
- Rapid prototyping and modelling
Technical Specifications
Technical data for eResin-PLA| Resin Type | eResin-PLA |
|---|
| Shore Hardness | 75-82D |
|---|
| Viscosity | 100-270 mPa·s |
|---|
| Solid Density | 1.07-1.10 g/cm³ |
|---|
| Tensile Strength | 24-55 MPa |
|---|
| Elongation at Break | 24-37% |
|---|
| Flexural Strength | 25-61 MPa |
|---|
| Izod Impact (Notched) | 27-40 J/m |
|---|
| Price | $19.99 |
|---|
Handling & Printing Notes
With a viscosity of 100 mPa·s, this resin pours easily and requires minimal heating. The solid density of 1.07 g/cm³ is typical for photopolymer resins, resulting in lighter cured parts. Always refer to the official technical datasheet from eSUN for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About eSUN
Major manufacturer of 3D printing filaments and UV resins with broad material range.
Headquarters: Shenzhen, China
View all resins from eSUN →
Frequently Asked Questions
What is eResin-PLA used for?
eResin-PLA is primarily suited for general-purpose 3D printing. making it a good choice for demanding 3D printing applications.
How much does eResin-PLA cost?
eResin-PLA is priced at approximately $19.99. Check eSUN's website or authorised retailers for current pricing and availability.
← Browse all resins |
All resins from eSUN →