PM200 PMMA Like Resin
Manufacturer: eSUN
Type: Photopolymer Resin
PM200 PMMA Like Resin is a Photopolymer Resin resin manufactured by eSUN, major manufacturer of 3D printing filaments and UV resins with broad material range. With 10% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. priced at approximately —.
Key Properties
- Elongation at Break: 10% — minimal stretch — rigid
- Viscosity: 300 mPa·s — medium — flows well at room temperature
- Impact Resistance: 15 J/m — low impact toughness
Best Applications for PM200 PMMA Like Resin
- General-purpose SLA/MSLA 3D printing projects
- Rapid prototyping and modelling
Technical Specifications
Technical data for PM200 PMMA Like Resin| Resin Type | Photopolymer Resin |
|---|
| Shore Hardness | 70 Shore D |
|---|
| Viscosity | 300 mPa•s mPa·s |
|---|
| Solid Density | 1.05-1.15 g/cm³ g/cm³ |
|---|
| Tensile Strength | 58 MPa MPa |
|---|
| Elongation at Break | 10 %% |
|---|
| Flexural Strength | 30 MPa MPa |
|---|
| Izod Impact (Notched) | 15 J/m J/m |
|---|
| Price | — |
|---|
Handling & Printing Notes
With a viscosity of 300 mPa·s, this resin flows well at room temperature. The solid density of 1.05 g/cm³ is typical for photopolymer resins, resulting in lighter cured parts. Always refer to the official technical datasheet from eSUN for recommended print settings, exposure times, and post-curing instructions.
Similar Resins to Consider
About eSUN
Major manufacturer of 3D printing filaments and UV resins with broad material range.
Headquarters: Shenzhen, China
View all resins from eSUN →
Frequently Asked Questions
What is PM200 PMMA Like Resin used for?
PM200 PMMA Like Resin is primarily suited for general-purpose 3D printing. making it a good choice for demanding 3D printing applications.
How much does PM200 PMMA Like Resin cost?
PM200 PMMA Like Resin is priced at approximately —. Check eSUN's website or authorised retailers for current pricing and availability.
← Browse all resins |
All resins from eSUN →