Engineering LCD Resin - Strong
Manufacturer: FormFutura
Type: LCD Resin - Strong
Engineering LCD Resin - Strong is a LCD Resin - Strong resin manufactured by FormFutura, dutch manufacturer of high-quality 3D printing materials including LCD resins and composites. With a shore hardness of 86D, and 6% elongation at break, this resin is designed for applications requiring rigid, detailed prints. available in Opaque Black, priced at approximately $48.94.
Key Properties
- Hardness: 86D Shore — very rigid
- Elongation at Break: 6% — minimal stretch — rigid
- Viscosity: 500 mPa·s — medium-high — may benefit from slight warming before use
- Impact Resistance: 18 J/m — low impact toughness
Best Applications for Engineering LCD Resin - Strong
- Miniatures, jewellery masters, dental models, and detailed prototypes
Technical Specifications
Technical data for Engineering LCD Resin - Strong| Resin Type | LCD Resin - Strong |
|---|
| Shore Hardness | 86D |
|---|
| Viscosity | 500 mPa·s |
|---|
| Solid Density | 1.18 g/cm³ |
|---|
| Colour Options | Opaque Black |
|---|
| Tensile Stress at Break | 72.0 MPa |
|---|
| Tensile Strength | 72 MPa |
|---|
| Young's Modulus | 1500-2500 MPa |
|---|
| Elongation at Break | 6% |
|---|
| Flexural Modulus | 2500-3000 MPa |
|---|
| Flexural Stress at Break | 110-120 MPa |
|---|
| Flexural Strength | 110-120 MPa |
|---|
| Izod Impact (Notched) | 18 J/m |
|---|
| Price | $48.94 |
|---|
Handling & Printing Notes
With a viscosity of 500 mPa·s, this resin may benefit from slight warming before use in colder environments. The solid density of 1.18 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from FormFutura for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About FormFutura
Dutch manufacturer of high-quality 3D printing materials including LCD resins and composites.
Headquarters: Geldermalsen, Netherlands
View all resins from FormFutura →
Frequently Asked Questions
What is Engineering LCD Resin - Strong used for?
Engineering LCD Resin - Strong is primarily suited for rigid, detailed prints. Its 86D Shore hardness means it is very rigid, making it a good choice for demanding 3D printing applications and is available in Opaque Black.
How much does Engineering LCD Resin - Strong cost?
Engineering LCD Resin - Strong is priced at approximately $48.94. Check FormFutura's website or authorised retailers for current pricing and availability.
What shore hardness is Engineering LCD Resin - Strong?
Engineering LCD Resin - Strong has a shore hardness of 86D, which classifies it as very rigid compared to most other resins.
← Browse all resins |
All resins from FormFutura →