Engineering SLA Resin - Heavy Duty
Manufacturer: FormFutura
Type: SLA Resin - Heavy Duty
Engineering SLA Resin - Heavy Duty is a SLA Resin - Heavy Duty resin manufactured by FormFutura, dutch manufacturer of high-quality 3D printing materials including LCD resins and composites. With a shore hardness of 87D, and 8% elongation at break, this resin is designed for applications requiring rigid, detailed prints. available in -, priced at approximately $87.09.
Key Properties
- Hardness: 87D Shore — very rigid
- Elongation at Break: 8% — minimal stretch — rigid
- Viscosity: 550 mPa·s — medium-high — may benefit from slight warming before use
- Impact Resistance: 20 J/m — moderate impact toughness
Best Applications for Engineering SLA Resin - Heavy Duty
- Miniatures, jewellery masters, dental models, and detailed prototypes
Technical Specifications
Technical data for Engineering SLA Resin - Heavy Duty| Resin Type | SLA Resin - Heavy Duty |
|---|
| Shore Hardness | 87D |
|---|
| Viscosity | 550.0 mPa·s |
|---|
| Solid Density | 1.12 g/cm³ |
|---|
| Colour Options | - |
|---|
| Tensile Stress at Break | 91.0 MPa |
|---|
| Tensile Strength | 91 MPa |
|---|
| Young's Modulus | 2500 MPa |
|---|
| Elongation at Break | 8% |
|---|
| Flexural Modulus | 3250 MPa |
|---|
| Flexural Stress at Break | 135.0 MPa |
|---|
| Flexural Strength | 135 MPa |
|---|
| Izod Impact (Notched) | 20 J/m |
|---|
| Price | $87.09 |
|---|
Handling & Printing Notes
With a viscosity of 550 mPa·s, this resin may benefit from slight warming before use in colder environments. The solid density of 1.12 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from FormFutura for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About FormFutura
Dutch manufacturer of high-quality 3D printing materials including LCD resins and composites.
Headquarters: Geldermalsen, Netherlands
View all resins from FormFutura →
Frequently Asked Questions
What is Engineering SLA Resin - Heavy Duty used for?
Engineering SLA Resin - Heavy Duty is primarily suited for rigid, detailed prints. Its 87D Shore hardness means it is very rigid, making it a good choice for demanding 3D printing applications and is available in -.
How much does Engineering SLA Resin - Heavy Duty cost?
Engineering SLA Resin - Heavy Duty is priced at approximately $87.09. Check FormFutura's website or authorised retailers for current pricing and availability.
What shore hardness is Engineering SLA Resin - Heavy Duty?
Engineering SLA Resin - Heavy Duty has a shore hardness of 87D, which classifies it as very rigid compared to most other resins.
← Browse all resins |
All resins from FormFutura →