Engineering SLA Resin - Tough
Manufacturer: FormFutura
Type: SLA Resin - Tough
Engineering SLA Resin - Tough is a SLA Resin - Tough resin manufactured by FormFutura, dutch manufacturer of high-quality 3D printing materials including LCD resins and composites. With a shore hardness of 68D, and 25% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. available in Extremely Transparent, priced at approximately $65.29.
Key Properties
- Hardness: 68D Shore — hard/durable
- Elongation at Break: 25% — moderate flexibility
- Viscosity: 1,000 mPa·s — medium-high — may benefit from slight warming before use
- Impact Resistance: 40 J/m — good impact toughness
Best Applications for Engineering SLA Resin - Tough
- General-purpose SLA/MSLA 3D printing projects
- Rapid prototyping and modelling
Technical Specifications
Technical data for Engineering SLA Resin - Tough| Resin Type | SLA Resin - Tough |
|---|
| Shore Hardness | 68D |
|---|
| Viscosity | 1000 mPa·s |
|---|
| Solid Density | 1.12 g/cm³ |
|---|
| Colour Options | Extremely Transparent |
|---|
| Tensile Stress at Break | 45.0 MPa |
|---|
| Tensile Strength | 45 MPa |
|---|
| Young's Modulus | 1400 MPa |
|---|
| Elongation at Break | 25% |
|---|
| Flexural Modulus | 900 MPa |
|---|
| Flexural Stress at Break | 35.0 MPa |
|---|
| Flexural Strength | 35 MPa |
|---|
| Izod Impact (Notched) | 40 J/m |
|---|
| Price | $65.29 |
|---|
Handling & Printing Notes
With a viscosity of 1,000 mPa·s, this resin may benefit from slight warming before use in colder environments. The solid density of 1.12 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from FormFutura for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About FormFutura
Dutch manufacturer of high-quality 3D printing materials including LCD resins and composites.
Headquarters: Geldermalsen, Netherlands
View all resins from FormFutura →
Frequently Asked Questions
What is Engineering SLA Resin - Tough used for?
Engineering SLA Resin - Tough is primarily suited for general-purpose 3D printing. Its 68D Shore hardness means it is hard/durable, making it a good choice for demanding 3D printing applications and is available in Extremely Transparent.
How much does Engineering SLA Resin - Tough cost?
Engineering SLA Resin - Tough is priced at approximately $65.29. Check FormFutura's website or authorised retailers for current pricing and availability.
What shore hardness is Engineering SLA Resin - Tough?
Engineering SLA Resin - Tough has a shore hardness of 68D, which classifies it as hard/durable compared to most other resins.
← Browse all resins |
All resins from FormFutura →