Formlabs Tough 2000 Resin V2
Manufacturer: Formlabs
Type: Tough
Formlabs Tough 2000 Resin V2 is a Tough resin manufactured by Formlabs, premium 3D printing solutions with professional-grade materials. With a shore hardness of 76D, and tensile stress at yield of 40.4 MPa, and 79% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. priced at approximately $189.14.
Key Properties
- Hardness: 76D Shore — hard/durable
- Tensile Strength: 40.4 MPa at yield — moderate tensile strength
- Elongation at Break: 79% — stretches significantly before breaking — flexible
- Viscosity: 2,680 mPa·s — high — benefits from pre-warming and longer drain times
- Impact Resistance: 25 J/m — moderate impact toughness
Best Applications for Formlabs Tough 2000 Resin V2
- Flexible and impact-resistant parts
- Snap-fit components and living hinges
Technical Specifications
Technical data for Formlabs Tough 2000 Resin V2| Resin Type | Tough |
|---|
| Shore Hardness | 76D |
|---|
| Viscosity | 2680.0 mPa·s |
|---|
| Solid Density | 1.09 g/cm³ |
|---|
| Tensile Stress at Yield | 40.4 MPa |
|---|
| Tensile Stress at Break | 34 MPa MPa |
|---|
| Tensile Strength | 40.4 MPa |
|---|
| Young's Modulus | 1800.0 MPa |
|---|
| Elongation at Break | 79.0% |
|---|
| Flexural Modulus | 1701.0 MPa |
|---|
| Flexural Stress at Yield | 49 MPa MPa |
|---|
| Flexural Stress at Break | 49 MPa MPa |
|---|
| Flexural Strength | 67.0 MPa |
|---|
| Izod Impact (Notched) | 25.0 J/m |
|---|
| Price | $189.14 |
|---|
Handling & Printing Notes
With a viscosity of 2,680 mPa·s, this resin benefits from pre-warming and longer drain times after printing. The solid density of 1.09 g/cm³ is typical for photopolymer resins, resulting in lighter cured parts. Always refer to the official technical datasheet from Formlabs for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About Formlabs
Premium 3D printing solutions with professional-grade materials. Industry leader in dental, jewelry, and engineering applications.
Headquarters: Boston, MA, USA
View all resins from Formlabs →
Frequently Asked Questions
What is Formlabs Tough 2000 Resin V2 used for?
Formlabs Tough 2000 Resin V2 is primarily suited for general-purpose 3D printing. Its 76D Shore hardness means it is hard/durable, making it a good choice for demanding 3D printing applications.
How much does Formlabs Tough 2000 Resin V2 cost?
Formlabs Tough 2000 Resin V2 is priced at approximately $189.14. Check Formlabs's website or authorised retailers for current pricing and availability.
What shore hardness is Formlabs Tough 2000 Resin V2?
Formlabs Tough 2000 Resin V2 has a shore hardness of 76D, which classifies it as hard/durable compared to most other resins.
← Browse all resins |
All resins from Formlabs →