Basic Resin
Manufacturer: HARZ Labs
Type: Basic
Basic Resin is a Basic resin manufactured by HARZ Labs, russian manufacturer of industrial and dental photopolymer resins. With 4.4% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. available in Red (semitransparent), priced at approximately $14.38.
Key Properties
- Elongation at Break: 4.4% — minimal stretch — rigid
- Viscosity: 150 mPa·s — low — easy to pour and clean
Best Applications for Basic Resin
- General-purpose SLA/MSLA 3D printing projects
- Rapid prototyping and modelling
Technical Specifications
Technical data for Basic Resin| Resin Type | Basic |
|---|
| Shore Hardness | 77-81D |
|---|
| Viscosity | 150-450 mPa·s |
|---|
| Solid Density | 1.0-1.2 g/cm³ |
|---|
| Colour Options | Red (semitransparent) |
|---|
| Tensile Stress at Break | 39.8 ± 4.2 MPa |
|---|
| Tensile Strength | 35.6-44 MPa |
|---|
| Elongation at Break | 4.4-7.4% |
|---|
| Flexural Modulus | 1410-1710 MPa |
|---|
| Flexural Stress at Break | 70.0 ± 4.1 MPa |
|---|
| Flexural Strength | 65.9-74.1 MPa |
|---|
| Price | $14.38 |
|---|
Handling & Printing Notes
With a viscosity of 150 mPa·s, this resin pours easily and requires minimal heating. The solid density of 1 g/cm³ is typical for photopolymer resins, resulting in lighter cured parts. Always refer to the official technical datasheet from HARZ Labs for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
Frequently Asked Questions
What is Basic Resin used for?
Basic Resin is primarily suited for general-purpose 3D printing. making it a good choice for demanding 3D printing applications and is available in Red (semitransparent).
How much does Basic Resin cost?
Basic Resin is priced at approximately $14.38. Check HARZ Labs's website or authorised retailers for current pricing and availability.
← Browse all resins |
All resins from HARZ Labs →