Model Grey
Manufacturer: HARZ Labs
Type: Model Grey
Model Grey is a Model Grey resin manufactured by HARZ Labs, russian manufacturer of industrial and dental photopolymer resins. With 7% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. available in Grey, priced at approximately $163.49.
Key Properties
- Elongation at Break: 7% — minimal stretch — rigid
- Viscosity: 350 mPa·s — medium — flows well at room temperature
Best Applications for Model Grey
- General-purpose SLA/MSLA 3D printing projects
- Rapid prototyping and modelling
Technical Specifications
Technical data for Model Grey| Resin Type | Model Grey |
|---|
| Shore Hardness | 77-83D |
|---|
| Viscosity | 350-1000 mPa·s |
|---|
| Solid Density | 1.0-1.2 g/cm³ |
|---|
| Colour Options | Grey |
|---|
| Tensile Stress at Break | 41.8 ± 2.3 MPa |
|---|
| Tensile Strength | 65-75 MPa |
|---|
| Young's Modulus | 150-1150 MPa |
|---|
| Elongation at Break | 7-13% |
|---|
| Flexural Modulus | 2200-2600 MPa |
|---|
| Flexural Stress at Break | 73.8 ± 3.7 MPa |
|---|
| Flexural Strength | 110-150 MPa |
|---|
| Price | $163.49 |
|---|
Handling & Printing Notes
With a viscosity of 350 mPa·s, this resin flows well at room temperature. The solid density of 1 g/cm³ is typical for photopolymer resins, resulting in lighter cured parts. Always refer to the official technical datasheet from HARZ Labs for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
Frequently Asked Questions
What is Model Grey used for?
Model Grey is primarily suited for general-purpose 3D printing. making it a good choice for demanding 3D printing applications and is available in Grey.
How much does Model Grey cost?
Model Grey is priced at approximately $163.49. Check HARZ Labs's website or authorised retailers for current pricing and availability.
← Browse all resins |
All resins from HARZ Labs →