UltraPrint PAE10 Elastic Tool Resin (Silicone-like)
Manufacturer: HeyGears
Type: Elastic (Silicone-like)
UltraPrint PAE10 Elastic Tool Resin (Silicone-like) is a Elastic (Silicone-like) resin manufactured by HeyGears, heyGears produces 3D printers and resins for dental, jewelry, and general purpose applications. With a shore hardness of 49A, and 433% elongation at break, this resin is designed for applications requiring flexible/rubber-like applications. available in Translucent, priced at approximately $109.00.
Key Properties
- Hardness: 49A Shore — rubber-like
- Elongation at Break: 433% — stretches significantly before breaking — flexible
- Viscosity: 2,420 mPa·s — high — benefits from pre-warming and longer drain times
Best Applications for UltraPrint PAE10 Elastic Tool Resin (Silicone-like)
- Flexible parts, gaskets, seals, and cushioning
- Rubber-like models and wearable prototypes
Technical Specifications
Technical data for UltraPrint PAE10 Elastic Tool Resin (Silicone-like)| Resin Type | Elastic (Silicone-like) |
|---|
| Shore Hardness | 49A |
|---|
| Viscosity | 2420 mPa·s |
|---|
| Solid Density | g/cm³ |
|---|
| Colour Options | Translucent |
|---|
| Tensile Strength | 1.4 MPa |
|---|
| Young's Modulus | MPa |
|---|
| Elongation at Break | 433% |
|---|
| Flexural Modulus | MPa |
|---|
| Flexural Strength | MPa |
|---|
| Price | $109.00 |
|---|
Handling & Printing Notes
With a viscosity of 2,420 mPa·s, this resin benefits from pre-warming and longer drain times after printing. Always refer to the official technical datasheet from HeyGears for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About HeyGears
HeyGears produces 3D printers and resins for dental, jewelry, and general purpose applications.
Headquarters: China
View all resins from HeyGears →
Frequently Asked Questions
What is UltraPrint PAE10 Elastic Tool Resin (Silicone-like) used for?
UltraPrint PAE10 Elastic Tool Resin (Silicone-like) is primarily suited for flexible/rubber-like applications. Its 49A Shore hardness means it is rubber-like, making it a good choice for demanding 3D printing applications and is available in Translucent.
How much does UltraPrint PAE10 Elastic Tool Resin (Silicone-like) cost?
UltraPrint PAE10 Elastic Tool Resin (Silicone-like) is priced at approximately $109.00. Check HeyGears's website or authorised retailers for current pricing and availability.
What shore hardness is UltraPrint PAE10 Elastic Tool Resin (Silicone-like)?
UltraPrint PAE10 Elastic Tool Resin (Silicone-like) has a shore hardness of 49A, which classifies it as rubber-like compared to most other resins.
← Browse all resins |
All resins from HeyGears →