Eco-Standard Resin (PJHC-D Series)
Manufacturer: JamgHe
Type: Eco-Standard Resin (PJHC-D Series)
Eco-Standard Resin (PJHC-D Series) is a Eco-Standard Resin (PJHC-D Series) resin manufactured by JamgHe, large catalog of dental, engineering, and specialty UV resins for professional applications. With 8.8% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. available in -, priced at approximately $29.99.
Key Properties
- Elongation at Break: 8.8% — minimal stretch — rigid
- Viscosity: 200 mPa·s — medium — flows well at room temperature
- Impact Resistance: 35.3 J/m — moderate impact toughness
Best Applications for Eco-Standard Resin (PJHC-D Series)
- General-purpose SLA/MSLA 3D printing projects
- Rapid prototyping and modelling
Technical Specifications
Technical data for Eco-Standard Resin (PJHC-D Series)| Resin Type | Eco-Standard Resin (PJHC-D Series) |
|---|
| Shore Hardness | 80-88D |
|---|
| Viscosity | 200-400 mPa·s |
|---|
| Solid Density | 1.05-1.25 g/cm³ |
|---|
| Colour Options | - |
|---|
| Tensile Stress at Break | 33.78 MPa |
|---|
| Tensile Strength | 33.8 MPa |
|---|
| Young's Modulus | 521 MPa |
|---|
| Elongation at Break | 8.8% |
|---|
| Flexural Modulus | 708.6 MPa |
|---|
| Flexural Stress at Break | 30.11 MPa |
|---|
| Flexural Strength | 30.1 MPa |
|---|
| Izod Impact (Notched) | 35.3 J/m |
|---|
| Price | $29.99 |
|---|
Handling & Printing Notes
With a viscosity of 200 mPa·s, this resin flows well at room temperature. The solid density of 1.05 g/cm³ is typical for photopolymer resins, resulting in lighter cured parts. Always refer to the official technical datasheet from JamgHe for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About JamgHe
Large catalog of dental, engineering, and specialty UV resins for professional applications.
Headquarters: China
View all resins from JamgHe →
Frequently Asked Questions
What is Eco-Standard Resin (PJHC-D Series) used for?
Eco-Standard Resin (PJHC-D Series) is primarily suited for general-purpose 3D printing. making it a good choice for demanding 3D printing applications and is available in -.
How much does Eco-Standard Resin (PJHC-D Series) cost?
Eco-Standard Resin (PJHC-D Series) is priced at approximately $29.99. Check JamgHe's website or authorised retailers for current pricing and availability.
← Browse all resins |
All resins from JamgHe →