Engineering PRO Resin
Manufacturer: JamgHe
Type: Engineering PRO Resin (SG-71D)
Engineering PRO Resin is a Engineering PRO Resin (SG-71D) resin manufactured by JamgHe, large catalog of dental, engineering, and specialty UV resins for professional applications. With 53.3% elongation at break, this resin is designed for applications requiring tough, impact-resistant applications. available in -, priced at approximately $70.27.
Key Properties
- Elongation at Break: 53.3% — stretches significantly before breaking — flexible
- Viscosity: 3,000 mPa·s — high — benefits from pre-warming and longer drain times
- Impact Resistance: 92.4 J/m — excellent impact toughness
Best Applications for Engineering PRO Resin
- Flexible and impact-resistant parts
- Snap-fit components and living hinges
- Tough enclosures, protective covers, and impact-resistant parts
Technical Specifications
Technical data for Engineering PRO Resin| Resin Type | Engineering PRO Resin (SG-71D) |
|---|
| Shore Hardness | 78-82D |
|---|
| Viscosity | 3000-5000 mPa·s |
|---|
| Solid Density | 1.1-1.25 g/cm³ |
|---|
| Colour Options | - |
|---|
| Tensile Stress at Break | 33.475 MPa |
|---|
| Tensile Strength | 33.5 MPa |
|---|
| Young's Modulus | 391.3 MPa |
|---|
| Elongation at Break | 53.3% |
|---|
| Flexural Modulus | 1104 MPa |
|---|
| Flexural Stress at Break | 43.435 MPa |
|---|
| Flexural Strength | 43.4 MPa |
|---|
| Izod Impact (Notched) | 92.4 J/m |
|---|
| Price | $70.27 |
|---|
Handling & Printing Notes
With a viscosity of 3,000 mPa·s, this resin benefits from pre-warming and longer drain times after printing. The solid density of 1.1 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from JamgHe for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About JamgHe
Large catalog of dental, engineering, and specialty UV resins for professional applications.
Headquarters: China
View all resins from JamgHe →
Frequently Asked Questions
What is Engineering PRO Resin used for?
Engineering PRO Resin is primarily suited for tough, impact-resistant applications. making it a good choice for demanding 3D printing applications and is available in -.
How much does Engineering PRO Resin cost?
Engineering PRO Resin is priced at approximately $70.27. Check JamgHe's website or authorised retailers for current pricing and availability.
← Browse all resins |
All resins from JamgHe →