High Tenacity Pro Resin
Manufacturer: JamgHe
Type: High Tenacity Pro Resin
High Tenacity Pro Resin is a High Tenacity Pro Resin resin manufactured by JamgHe, large catalog of dental, engineering, and specialty UV resins for professional applications. With 187.1% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. available in -, priced at approximately $79.00.
Key Properties
- Elongation at Break: 187.1% — stretches significantly before breaking — flexible
- Viscosity: 500 mPa·s — medium-high — may benefit from slight warming before use
- Impact Resistance: 47 J/m — good impact toughness
Best Applications for High Tenacity Pro Resin
- Flexible and impact-resistant parts
- Snap-fit components and living hinges
Technical Specifications
Technical data for High Tenacity Pro Resin| Resin Type | High Tenacity Pro Resin |
|---|
| Shore Hardness | 73-75D |
|---|
| Viscosity | 500-650 mPa·s |
|---|
| Solid Density | 1.05-1.25 g/cm³ |
|---|
| Colour Options | - |
|---|
| Tensile Stress at Break | 22.58 MPa |
|---|
| Tensile Strength | 22.6 MPa |
|---|
| Young's Modulus | 267.7 MPa |
|---|
| Elongation at Break | 187.1% |
|---|
| Flexural Modulus | 672.9 MPa |
|---|
| Flexural Stress at Break | 25.48 MPa |
|---|
| Flexural Strength | 25.5 MPa |
|---|
| Izod Impact (Notched) | 47 J/m |
|---|
| Price | $79.00 |
|---|
Handling & Printing Notes
With a viscosity of 500 mPa·s, this resin may benefit from slight warming before use in colder environments. The solid density of 1.05 g/cm³ is typical for photopolymer resins, resulting in lighter cured parts. Always refer to the official technical datasheet from JamgHe for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About JamgHe
Large catalog of dental, engineering, and specialty UV resins for professional applications.
Headquarters: China
View all resins from JamgHe →
Frequently Asked Questions
What is High Tenacity Pro Resin used for?
High Tenacity Pro Resin is primarily suited for general-purpose 3D printing. making it a good choice for demanding 3D printing applications and is available in -.
How much does High Tenacity Pro Resin cost?
High Tenacity Pro Resin is priced at approximately $79.00. Check JamgHe's website or authorised retailers for current pricing and availability.
← Browse all resins |
All resins from JamgHe →