Water Washable Pro Model Resin
Manufacturer: JamgHe
Type: Water Washable Pro Model Resin
Water Washable Pro Model Resin is a Water Washable Pro Model Resin resin manufactured by JamgHe, large catalog of dental, engineering, and specialty UV resins for professional applications. With 13.5% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. available in -, priced at approximately $86.48.
Key Properties
- Elongation at Break: 13.5% — minimal stretch — rigid
- Viscosity: 500 mPa·s — medium-high — may benefit from slight warming before use
- Impact Resistance: 9.9 J/m — low impact toughness
Best Applications for Water Washable Pro Model Resin
- General-purpose SLA/MSLA 3D printing projects
- Rapid prototyping and modelling
Technical Specifications
Technical data for Water Washable Pro Model Resin| Resin Type | Water Washable Pro Model Resin |
|---|
| Shore Hardness | 79-83D |
|---|
| Viscosity | 500-700 mPa·s |
|---|
| Solid Density | 1.05-1.25 g/cm³ |
|---|
| Colour Options | - |
|---|
| Tensile Stress at Break | 26.54 MPa |
|---|
| Tensile Strength | 26.5 MPa |
|---|
| Young's Modulus | 286.6 MPa |
|---|
| Elongation at Break | 13.5% |
|---|
| Flexural Modulus | 771.6 MPa |
|---|
| Flexural Stress at Break | 29.05 MPa |
|---|
| Flexural Strength | 29.1 MPa |
|---|
| Izod Impact (Notched) | 9.9 J/m |
|---|
| Price | $86.48 |
|---|
Handling & Printing Notes
With a viscosity of 500 mPa·s, this resin may benefit from slight warming before use in colder environments. The solid density of 1.05 g/cm³ is typical for photopolymer resins, resulting in lighter cured parts. Always refer to the official technical datasheet from JamgHe for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About JamgHe
Large catalog of dental, engineering, and specialty UV resins for professional applications.
Headquarters: China
View all resins from JamgHe →
Frequently Asked Questions
What is Water Washable Pro Model Resin used for?
Water Washable Pro Model Resin is primarily suited for general-purpose 3D printing. making it a good choice for demanding 3D printing applications and is available in -.
How much does Water Washable Pro Model Resin cost?
Water Washable Pro Model Resin is priced at approximately $86.48. Check JamgHe's website or authorised retailers for current pricing and availability.
← Browse all resins |
All resins from JamgHe →