LOCTITE 3D 3843
Manufacturer: Loctite (Henkel)
Type: Tough (Industrial)
LOCTITE 3D 3843 is a Tough (Industrial) resin manufactured by Loctite (Henkel), industrial-grade 3D printing resins from Henkel's Loctite brand for engineering applications. With a shore hardness of 67D, and tensile stress at yield of 53 MPa, and 43% elongation at break, this resin is designed for applications requiring flexible and impact-resistant parts. available in Clear, White, Matte Black, priced at approximately $299.00.
Key Properties
- Hardness: 67D Shore — hard/durable
- Tensile Strength: 53 MPa at yield — moderate tensile strength
- Elongation at Break: 43% — stretches significantly before breaking — flexible
- Viscosity: 740 mPa·s — medium-high — may benefit from slight warming before use
- Impact Resistance: 53 J/m — good impact toughness
Best Applications for LOCTITE 3D 3843
- Flexible and impact-resistant parts
- Snap-fit components and living hinges
- Mechanical parts, brackets, housings, and tooling
- Functional prototypes requiring structural integrity
Technical Specifications
Technical data for LOCTITE 3D 3843| Resin Type | Tough (Industrial) |
|---|
| Shore Hardness | 67D |
|---|
| Viscosity | 740-880 mPa·s |
|---|
| Solid Density | 1.18 g/cm³ |
|---|
| Colour Options | Clear, White, Matte Black |
|---|
| Tensile Stress at Yield | 53±2 MPa |
|---|
| Tensile Stress at Break | 44 MPa (Clear) / 49 MPa (White) / 51 MPa (Matte Black) MPa |
|---|
| Tensile Strength | 51±2 MPa |
|---|
| Young's Modulus | 1806±47 MPa |
|---|
| Elongation at Break | 43±10% |
|---|
| Flexural Modulus | 1783±45 MPa |
|---|
| Izod Impact (Notched) | 53±4 J/m |
|---|
| Price | $299.00 |
|---|
Handling & Printing Notes
With a viscosity of 740 mPa·s, this resin may benefit from slight warming before use in colder environments. The solid density of 1.18 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from Loctite (Henkel) for recommended print settings, exposure times, and post-curing instructions.
Similar Resins to Consider
Frequently Asked Questions
What is LOCTITE 3D 3843 used for?
LOCTITE 3D 3843 is primarily suited for flexible and impact-resistant parts. Its 67D Shore hardness means it is hard/durable, making it a good choice for demanding 3D printing applications and is available in Clear, White, Matte Black.
How much does LOCTITE 3D 3843 cost?
LOCTITE 3D 3843 is priced at approximately $299.00. Check Loctite (Henkel)'s website or authorised retailers for current pricing and availability.
What shore hardness is LOCTITE 3D 3843?
LOCTITE 3D 3843 has a shore hardness of 67D, which classifies it as hard/durable compared to most other resins.
← Browse all resins |
All resins from Loctite (Henkel) →