W900 Water Washable Resin
Manufacturer: Magforms
Type: Standard Resin
W900 Water Washable Resin is a Standard Resin resin manufactured by Magforms, zhongshan MagForms Technology Co. With a shore hardness of 77D, and 43.9% elongation at break, this resin is designed for applications requiring tough, impact-resistant applications. available in Gray White, priced at approximately —.
Key Properties
- Hardness: 77D Shore — hard/durable
- Elongation at Break: 43.9% — stretches significantly before breaking — flexible
- Viscosity: 190 mPa·s — low — easy to pour and clean
- Impact Resistance: 57.9 J/m — good impact toughness
Best Applications for W900 Water Washable Resin
- Flexible and impact-resistant parts
- Snap-fit components and living hinges
- Tough enclosures, protective covers, and impact-resistant parts
Technical Specifications
Technical data for W900 Water Washable Resin| Resin Type | Standard Resin |
|---|
| Shore Hardness | 77D |
|---|
| Viscosity | 190 mPa·s |
|---|
| Solid Density | 1.11 g/cm³ |
|---|
| Colour Options | Gray White |
|---|
| Tensile Strength | 19.5 MPa |
|---|
| Young's Modulus | 2200-2300 MPa |
|---|
| Elongation at Break | 43.9% |
|---|
| Flexural Modulus | 948.8 MPa |
|---|
| Flexural Strength | 45.4 MPa |
|---|
| Izod Impact (Notched) | 57.9 J/m |
|---|
| Price | — |
|---|
Handling & Printing Notes
With a viscosity of 190 mPa·s, this resin pours easily and requires minimal heating. The solid density of 1.11 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from Magforms for recommended print settings, exposure times, and post-curing instructions.
Similar Resins to Consider
About Magforms
Zhongshan MagForms Technology Co., Ltd. is a Chinese manufacturer of LCD, DLP and SLA 3D printing resins (405nm and 355nm) for engineering, jewelry casting, footwear, dental and general-purpose applications, plus industrial SLA printers.
Headquarters: Zhongshan, China
View all resins from Magforms →
Frequently Asked Questions
What is W900 Water Washable Resin used for?
W900 Water Washable Resin is primarily suited for tough, impact-resistant applications. Its 77D Shore hardness means it is hard/durable, making it a good choice for demanding 3D printing applications and is available in Gray White.
How much does W900 Water Washable Resin cost?
W900 Water Washable Resin is priced at approximately —. Check Magforms's website or authorised retailers for current pricing and availability.
What shore hardness is W900 Water Washable Resin?
W900 Water Washable Resin has a shore hardness of 77D, which classifies it as hard/durable compared to most other resins.
← Browse all resins |
All resins from Magforms →