PriZma3D Resin Bio Crown - 250gr
Manufacturer: Makertech Labs
Type: Dental
PriZma3D Resin Bio Crown - 250gr is a Dental resin manufactured by Makertech Labs, first 3D resin manufacturer in Latin America. With 4.5% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. priced at approximately $256.00.
Key Properties
- Elongation at Break: 4.5% — minimal stretch — rigid
- Viscosity: 255 mPa·s — medium — flows well at room temperature
Best Applications for PriZma3D Resin Bio Crown - 250gr
- General-purpose SLA/MSLA 3D printing projects
- Rapid prototyping and modelling
Technical Specifications
Technical data for PriZma3D Resin Bio Crown - 250gr| Resin Type | Dental |
|---|
| Shore Hardness | 78-85D |
|---|
| Viscosity | 255-500 mPa·s |
|---|
| Tensile Strength | 61.9 MPa |
|---|
| Elongation at Break | 4.5% |
|---|
| Flexural Modulus | 2850 MPa |
|---|
| Flexural Strength | 105.5 MPa |
|---|
| Price | $256.00 |
|---|
Handling & Printing Notes
With a viscosity of 255 mPa·s, this resin flows well at room temperature. Always refer to the official technical datasheet from Makertech Labs for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About Makertech Labs
First 3D resin manufacturer in Latin America. Part of Maquira Dental Group (Brazil). Specializes in dental/biocompatible resins and model resins. FDA approved, ships to 40+ countries. Founded 2013.
Headquarters: Brazil
View all resins from Makertech Labs →
Frequently Asked Questions
What is PriZma3D Resin Bio Crown - 250gr used for?
PriZma3D Resin Bio Crown - 250gr is primarily suited for general-purpose 3D printing. making it a good choice for demanding 3D printing applications.
How much does PriZma3D Resin Bio Crown - 250gr cost?
PriZma3D Resin Bio Crown - 250gr is priced at approximately $256.00. Check Makertech Labs's website or authorised retailers for current pricing and availability.
← Browse all resins |
All resins from Makertech Labs →