SPLINT Biocompatible Dental Resin
Manufacturer: Monocure3D
Type: Dental
SPLINT Biocompatible Dental Resin is a Dental resin manufactured by Monocure3D, australian manufacturer of premium UV-curable 3D printing resins. With a shore hardness of 85D, and 105% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. priced at approximately $217.07.
Key Properties
- Hardness: 85D Shore — very rigid
- Elongation at Break: 105% — stretches significantly before breaking — flexible
- Viscosity: 600 mPa·s — medium-high — may benefit from slight warming before use
Best Applications for SPLINT Biocompatible Dental Resin
- Flexible and impact-resistant parts
- Snap-fit components and living hinges
Technical Specifications
Technical data for SPLINT Biocompatible Dental Resin| Resin Type | Dental |
|---|
| Shore Hardness | 85D |
|---|
| Viscosity | 600 mPa·s |
|---|
| Solid Density | 1.1 g/cm³ |
|---|
| Tensile Stress at Break | 46-52 MPa |
|---|
| Tensile Strength | 46-52 MPa |
|---|
| Elongation at Break | 105% |
|---|
| Flexural Modulus | 1000-1400 MPa |
|---|
| Flexural Stress at Break | 48 MPa |
|---|
| Flexural Strength | 45 MPa |
|---|
| Price | $217.07 |
|---|
Handling & Printing Notes
With a viscosity of 600 mPa·s, this resin may benefit from slight warming before use in colder environments. The solid density of 1.1 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from Monocure3D for recommended print settings, exposure times, and post-curing instructions.
Similar Resins to Consider
About Monocure3D
Australian manufacturer of premium UV-curable 3D printing resins. ISO 9001 certified. Specializes in dental, industrial, castable, and engineering resins with full technical data support. 20+ resin products covering standard, tough, high-temperature, flexible, castable, and dental applications.
Headquarters: Sydney, Australia
View all resins from Monocure3D →
Frequently Asked Questions
What is SPLINT Biocompatible Dental Resin used for?
SPLINT Biocompatible Dental Resin is primarily suited for general-purpose 3D printing. Its 85D Shore hardness means it is very rigid, making it a good choice for demanding 3D printing applications.
How much does SPLINT Biocompatible Dental Resin cost?
SPLINT Biocompatible Dental Resin is priced at approximately $217.07. Check Monocure3D's website or authorised retailers for current pricing and availability.
What shore hardness is SPLINT Biocompatible Dental Resin?
SPLINT Biocompatible Dental Resin has a shore hardness of 85D, which classifies it as very rigid compared to most other resins.
← Browse all resins |
All resins from Monocure3D →