TENSILE+ Resin
Manufacturer: Monocure3D
Type: Standard
TENSILE+ Resin is a Standard resin manufactured by Monocure3D, australian manufacturer of premium UV-curable 3D printing resins. With a shore hardness of 92D, and 2.5% elongation at break, this resin is designed for applications requiring tough, impact-resistant applications. priced at approximately $78.32.
Key Properties
- Hardness: 92D Shore — very rigid
- Elongation at Break: 2.5% — minimal stretch — rigid
- Viscosity: 500 mPa·s — medium-high — may benefit from slight warming before use
- Impact Resistance: 105 J/m — excellent impact toughness
Best Applications for TENSILE+ Resin
- Tough enclosures, protective covers, and impact-resistant parts
- Miniatures, jewellery masters, dental models, and detailed prototypes
Technical Specifications
Technical data for TENSILE+ Resin| Resin Type | Standard |
|---|
| Shore Hardness | 92D |
|---|
| Viscosity | 500 mPa·s |
|---|
| Tensile Stress at Break | 86.7 MPa |
|---|
| Tensile Strength | 86.7 MPa |
|---|
| Young's Modulus | 1400 MPa |
|---|
| Elongation at Break | 2.5% |
|---|
| Flexural Modulus | 2200 MPa |
|---|
| Flexural Stress at Break | 90 MPa |
|---|
| Izod Impact (Notched) | 105 J/m |
|---|
| Price | $78.32 |
|---|
Handling & Printing Notes
With a viscosity of 500 mPa·s, this resin may benefit from slight warming before use in colder environments. Always refer to the official technical datasheet from Monocure3D for recommended print settings, exposure times, and post-curing instructions.
Similar Resins to Consider
About Monocure3D
Australian manufacturer of premium UV-curable 3D printing resins. ISO 9001 certified. Specializes in dental, industrial, castable, and engineering resins with full technical data support. 20+ resin products covering standard, tough, high-temperature, flexible, castable, and dental applications.
Headquarters: Sydney, Australia
View all resins from Monocure3D →
Frequently Asked Questions
What is TENSILE+ Resin used for?
TENSILE+ Resin is primarily suited for tough, impact-resistant applications. Its 92D Shore hardness means it is very rigid, making it a good choice for demanding 3D printing applications.
How much does TENSILE+ Resin cost?
TENSILE+ Resin is priced at approximately $78.32. Check Monocure3D's website or authorised retailers for current pricing and availability.
What shore hardness is TENSILE+ Resin?
TENSILE+ Resin has a shore hardness of 92D, which classifies it as very rigid compared to most other resins.
← Browse all resins |
All resins from Monocure3D →