xFLEX475-Black
Manufacturer: Nexa3D
Type: Flexible
xFLEX475-Black is a Flexible resin manufactured by Nexa3D. With a shore hardness of 40A, and 162% elongation at break, this resin is designed for applications requiring flexible/rubber-like applications. available in Black, priced at approximately $199.00.
Key Properties
- Hardness: 40A Shore — rubber-like
- Elongation at Break: 162% — stretches significantly before breaking — flexible
- Viscosity: 1,500 mPa·s — high — benefits from pre-warming and longer drain times
Best Applications for xFLEX475-Black
- Flexible parts, gaskets, seals, and cushioning
- Rubber-like models and wearable prototypes
Technical Specifications
Technical data for xFLEX475-Black| Resin Type | Flexible |
|---|
| Shore Hardness | 40A |
|---|
| Viscosity | 1500 mPa·s |
|---|
| Solid Density | 1.04 g/cm³ |
|---|
| Colour Options | Black |
|---|
| Tensile Strength | 2.2 MPa |
|---|
| Young's Modulus | 1.8 MPa |
|---|
| Elongation at Break | 162% |
|---|
| Flexural Modulus | MPa |
|---|
| Flexural Strength | MPa |
|---|
| Price | $199.00 |
|---|
Handling & Printing Notes
With a viscosity of 1,500 mPa·s, this resin benefits from pre-warming and longer drain times after printing. The solid density of 1.04 g/cm³ is typical for photopolymer resins, resulting in lighter cured parts. Always refer to the official technical datasheet from Nexa3D for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About Nexa3D
Nexa3D produces ultrafast polymer 3D printers and a broad portfolio of engineering, dental, and casting photopolymer resins.
Headquarters: Ventura, California, USA
View all resins from Nexa3D →
Frequently Asked Questions
What is xFLEX475-Black used for?
xFLEX475-Black is primarily suited for flexible/rubber-like applications. Its 40A Shore hardness means it is rubber-like, making it a good choice for demanding 3D printing applications and is available in Black.
How much does xFLEX475-Black cost?
xFLEX475-Black is priced at approximately $199.00. Check Nexa3D's website or authorised retailers for current pricing and availability.
What shore hardness is xFLEX475-Black?
xFLEX475-Black has a shore hardness of 40A, which classifies it as rubber-like compared to most other resins.
← Browse all resins |
All resins from Nexa3D →