xPEEK147
Manufacturer: Nexa3D
Type: High Temperature
xPEEK147 is a High Temperature resin manufactured by Nexa3D. With a shore hardness of 94D, and 3.3% elongation at break, this resin is designed for applications requiring rigid, detailed prints. available in Natural, priced at approximately $399.00.
Key Properties
- Hardness: 94D Shore — very rigid
- Elongation at Break: 3.3% — minimal stretch — rigid
- Viscosity: 1,900 mPa·s — high — benefits from pre-warming and longer drain times
- Impact Resistance: 14.6 J/m — low impact toughness
Best Applications for xPEEK147
- Miniatures, jewellery masters, dental models, and detailed prototypes
Technical Specifications
Technical data for xPEEK147| Resin Type | High Temperature |
|---|
| Shore Hardness | 94D |
|---|
| Viscosity | 1900-2300 mPa·s |
|---|
| Solid Density | 1.26 g/cm³ |
|---|
| Colour Options | Natural |
|---|
| Tensile Strength | 53 MPa |
|---|
| Young's Modulus | 2436 MPa |
|---|
| Elongation at Break | 3.3% |
|---|
| Flexural Modulus | 2845 MPa |
|---|
| Flexural Strength | 111 MPa |
|---|
| Izod Impact (Notched) | 14.6 J/m |
|---|
| Price | $399.00 |
|---|
Handling & Printing Notes
With a viscosity of 1,900 mPa·s, this resin benefits from pre-warming and longer drain times after printing. The solid density of 1.26 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from Nexa3D for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About Nexa3D
Nexa3D produces ultrafast polymer 3D printers and a broad portfolio of engineering, dental, and casting photopolymer resins.
Headquarters: Ventura, California, USA
View all resins from Nexa3D →
Frequently Asked Questions
What is xPEEK147 used for?
xPEEK147 is primarily suited for rigid, detailed prints. Its 94D Shore hardness means it is very rigid, making it a good choice for demanding 3D printing applications and is available in Natural.
How much does xPEEK147 cost?
xPEEK147 is priced at approximately $399.00. Check Nexa3D's website or authorised retailers for current pricing and availability.
What shore hardness is xPEEK147?
xPEEK147 has a shore hardness of 94D, which classifies it as very rigid compared to most other resins.
← Browse all resins |
All resins from Nexa3D →