Neo Resin
Manufacturer: Peopoly
Type: Standard Resin
Neo Resin is a Standard Resin resin manufactured by Peopoly, 3D printer and resin manufacturer, known for Moai and Deft/Neo resin lines. With a shore hardness of 85D, and 4.3% elongation at break, this resin is designed for applications requiring rigid, detailed prints. priced at approximately €65.00.
Key Properties
- Hardness: 85D Shore — very rigid
- Elongation at Break: 4.3% — minimal stretch — rigid
- Viscosity: 53 mPa·s — low — easy to pour and clean
Best Applications for Neo Resin
- Miniatures, jewellery masters, dental models, and detailed prototypes
Technical Specifications
Technical data for Neo Resin| Resin Type | Standard Resin |
|---|
| Shore Hardness | 85D |
|---|
| Viscosity | 53 mPa·s |
|---|
| Solid Density | 1.11-1.15 g/cm³ |
|---|
| Tensile Strength | 33 MPa |
|---|
| Young's Modulus | 460 MPa |
|---|
| Elongation at Break | 4.3% |
|---|
| Price | €65.00 |
|---|
Handling & Printing Notes
With a viscosity of 53 mPa·s, this resin pours easily and requires minimal heating. The solid density of 1.11 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from Peopoly for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
Frequently Asked Questions
What is Neo Resin used for?
Neo Resin is primarily suited for rigid, detailed prints. Its 85D Shore hardness means it is very rigid, making it a good choice for demanding 3D printing applications.
How much does Neo Resin cost?
Neo Resin is priced at approximately €65.00. Check Peopoly's website or authorised retailers for current pricing and availability.
What shore hardness is Neo Resin?
Neo Resin has a shore hardness of 85D, which classifies it as very rigid compared to most other resins.
← Browse all resins |
All resins from Peopoly →