Ceramic Crown Resin
Manufacturer: PioCreat
Type: Standard
Ceramic Crown Resin is a Standard resin manufactured by PioCreat. With 5% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. priced at approximately —.
Key Properties
- Elongation at Break: 5% — minimal stretch — rigid
- Viscosity: 1,800 mPa·s — high — benefits from pre-warming and longer drain times
Best Applications for Ceramic Crown Resin
- General-purpose SLA/MSLA 3D printing projects
- Rapid prototyping and modelling
Technical Specifications
Technical data for Ceramic Crown Resin| Resin Type | Standard |
|---|
| Shore Hardness | 93-95D |
|---|
| Viscosity | 1800-2300 mPa·s |
|---|
| Solid Density | 1.55-1.65 g/cm³ |
|---|
| Tensile Strength | 70-80 MPa |
|---|
| Young's Modulus | 1100-1500 MPa |
|---|
| Elongation at Break | 5-8% |
|---|
| Flexural Modulus | 6000-7000 MPa |
|---|
| Flexural Stress at Break | 145-165 MPa |
|---|
| Price | — |
|---|
Handling & Printing Notes
With a viscosity of 1,800 mPa·s, this resin benefits from pre-warming and longer drain times after printing. The solid density of 1.55 g/cm³ is typical for photopolymer resins, indicating a heavier, denser cured part. Always refer to the official technical datasheet from PioCreat for recommended print settings, exposure times, and post-curing instructions.
Similar Resins to Consider
About PioCreat
Creality-group brand specializing in dental, jewelry and general 3D printing resins, with biocompatible dental materials and precision casting lines.
Headquarters: Shenzhen, China
View all resins from PioCreat →
Frequently Asked Questions
What is Ceramic Crown Resin used for?
Ceramic Crown Resin is primarily suited for general-purpose 3D printing. making it a good choice for demanding 3D printing applications.
How much does Ceramic Crown Resin cost?
Ceramic Crown Resin is priced at approximately —. Check PioCreat's website or authorised retailers for current pricing and availability.
← Browse all resins |
All resins from PioCreat →