Try-in Resin
Manufacturer: PioCreat
Type: Standard
Try-in Resin is a Standard resin manufactured by PioCreat. With 12% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. priced at approximately —.
Key Properties
- Elongation at Break: 12% — minimal stretch — rigid
Best Applications for Try-in Resin
- General-purpose SLA/MSLA 3D printing projects
- Rapid prototyping and modelling
Technical Specifications
Technical data for Try-in Resin| Resin Type | Standard |
|---|
| Shore Hardness | 85-90D |
|---|
| Solid Density | 700-900 g/cm³ |
|---|
| Tensile Strength | 55-65 MPa |
|---|
| Young's Modulus | 600-900 MPa |
|---|
| Elongation at Break | 12-16% |
|---|
| Flexural Modulus | 1800-2500 MPa |
|---|
| Flexural Stress at Break | 80-100 MPa |
|---|
| Price | — |
|---|
Handling & Printing Notes
The solid density of 700 g/cm³ is typical for photopolymer resins, indicating a heavier, denser cured part. Always refer to the official technical datasheet from PioCreat for recommended print settings, exposure times, and post-curing instructions.
Similar Resins to Consider
About PioCreat
Creality-group brand specializing in dental, jewelry and general 3D printing resins, with biocompatible dental materials and precision casting lines.
Headquarters: Shenzhen, China
View all resins from PioCreat →
Frequently Asked Questions
What is Try-in Resin used for?
Try-in Resin is primarily suited for general-purpose 3D printing. making it a good choice for demanding 3D printing applications.
How much does Try-in Resin cost?
Try-in Resin is priced at approximately —. Check PioCreat's website or authorised retailers for current pricing and availability.
← Browse all resins |
All resins from PioCreat →