Draft Grey V1 Resin
Manufacturer: Raise3D
Type: General Purpose
Draft Grey V1 Resin is a General Purpose resin manufactured by Raise3D, raise3D manufactures 3D printers and compatible resins for their DF2/DF2+ DLP printers. With a shore hardness of 86D, and 8.3% elongation at break, this resin is designed for applications requiring rigid, detailed prints. available in Grey, priced at approximately $49.99.
Key Properties
- Hardness: 86D Shore — very rigid
- Elongation at Break: 8.3% — minimal stretch — rigid
- Viscosity: 95 mPa·s — low — easy to pour and clean
- Impact Resistance: 18.4 J/m — low impact toughness
Best Applications for Draft Grey V1 Resin
- Miniatures, jewellery masters, dental models, and detailed prototypes
Technical Specifications
Technical data for Draft Grey V1 Resin| Resin Type | General Purpose |
|---|
| Shore Hardness | 86D |
|---|
| Viscosity | 95 mPa·s |
|---|
| Solid Density | 1.24 g/cm³ |
|---|
| Colour Options | Grey |
|---|
| Tensile Strength | 56.5 MPa |
|---|
| Young's Modulus | 2900 MPa |
|---|
| Elongation at Break | 8.3% |
|---|
| Flexural Modulus | 3300 MPa |
|---|
| Flexural Strength | 98.1 MPa |
|---|
| Izod Impact (Notched) | 18.4 J/m |
|---|
| Price | $49.99 |
|---|
Handling & Printing Notes
With a viscosity of 95 mPa·s, this resin pours easily and requires minimal heating. The solid density of 1.24 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from Raise3D for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About Raise3D
Raise3D manufactures 3D printers and compatible resins for their DF2/DF2+ DLP printers. The resin line includes standard prototyping, engineering, and specialty formulations.
Headquarters: Shanghai, China / Irvine, CA, USA
View all resins from Raise3D →
Frequently Asked Questions
What is Draft Grey V1 Resin used for?
Draft Grey V1 Resin is primarily suited for rigid, detailed prints. Its 86D Shore hardness means it is very rigid, making it a good choice for demanding 3D printing applications and is available in Grey.
How much does Draft Grey V1 Resin cost?
Draft Grey V1 Resin is priced at approximately $49.99. Check Raise3D's website or authorised retailers for current pricing and availability.
What shore hardness is Draft Grey V1 Resin?
Draft Grey V1 Resin has a shore hardness of 86D, which classifies it as very rigid compared to most other resins.
← Browse all resins |
All resins from Raise3D →