Sculpt High-Temp Resin
Manufacturer: Siraya Tech
Type: Sculpt
Sculpt High-Temp Resin is a Sculpt resin manufactured by Siraya Tech, engineering-grade resins for functional prototypes and end-use parts. With a shore hardness of 90D, and tensile stress at yield of 39 MPa, and 5% elongation at break, this resin is designed for applications requiring rigid, detailed prints. available in Clear, Grey, priced at approximately $105.78.
Key Properties
- Hardness: 90D Shore — very rigid
- Tensile Strength: 39 MPa at yield — moderate tensile strength
- Elongation at Break: 5% — minimal stretch — rigid
- Viscosity: 650 mPa·s — medium-high — may benefit from slight warming before use
Best Applications for Sculpt High-Temp Resin
- Miniatures, jewellery masters, dental models, and detailed prototypes
Technical Specifications
Technical data for Sculpt High-Temp Resin| Resin Type | Sculpt |
|---|
| Shore Hardness | 90D |
|---|
| Viscosity | 650 mPa·s |
|---|
| Solid Density | 1.2 g/cm³ |
|---|
| Colour Options | Clear, Grey |
|---|
| Tensile Stress at Yield | 39 MPa |
|---|
| Tensile Stress at Break | 35.0 MPa |
|---|
| Tensile Strength | 35 MPa |
|---|
| Young's Modulus | 3500 MPa |
|---|
| Elongation at Break | 5% |
|---|
| Flexural Modulus | 3300 MPa |
|---|
| Flexural Stress at Yield | 40.0 MPa |
|---|
| Flexural Strength | 40 MPa |
|---|
| Price | $105.78 |
|---|
Handling & Printing Notes
With a viscosity of 650 mPa·s, this resin may benefit from slight warming before use in colder environments. The solid density of 1.2 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from Siraya Tech for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About Siraya Tech
Engineering-grade resins for functional prototypes and end-use parts. Specialized in tough, durable, and flexible materials.
Headquarters: California, USA
View all resins from Siraya Tech →
Frequently Asked Questions
What is Sculpt High-Temp Resin used for?
Sculpt High-Temp Resin is primarily suited for rigid, detailed prints. Its 90D Shore hardness means it is very rigid, making it a good choice for demanding 3D printing applications and is available in Clear, Grey.
How much does Sculpt High-Temp Resin cost?
Sculpt High-Temp Resin is priced at approximately $105.78. Check Siraya Tech's website or authorised retailers for current pricing and availability.
What shore hardness is Sculpt High-Temp Resin?
Sculpt High-Temp Resin has a shore hardness of 90D, which classifies it as very rigid compared to most other resins.
← Browse all resins |
All resins from Siraya Tech →