Sculpt Ultra
Manufacturer: Siraya Tech
Type: Sculpt Ultra
Sculpt Ultra is a Sculpt Ultra resin manufactured by Siraya Tech, engineering-grade resins for functional prototypes and end-use parts. With a shore hardness of 99D, and tensile stress at yield of 33 MPa, and 1% elongation at break, this resin is designed for applications requiring rigid, detailed prints. available in Ultra White, priced at approximately $32.39.
Key Properties
- Hardness: 99D Shore — very rigid
- Tensile Strength: 33 MPa at yield — low tensile strength
- Elongation at Break: 1% — minimal stretch — rigid
- Viscosity: 650 mPa·s — medium-high — may benefit from slight warming before use
- Impact Resistance: 22 J/m — moderate impact toughness
Best Applications for Sculpt Ultra
- Miniatures, jewellery masters, dental models, and detailed prototypes
Technical Specifications
Technical data for Sculpt Ultra| Resin Type | Sculpt Ultra |
|---|
| Shore Hardness | 99D |
|---|
| Viscosity | 650 mPa·s |
|---|
| Solid Density | 1.6 g/cm³ |
|---|
| Colour Options | Ultra White |
|---|
| Tensile Stress at Yield | 33 MPa |
|---|
| Tensile Stress at Break | 31.0 MPa |
|---|
| Tensile Strength | 31 MPa |
|---|
| Young's Modulus | 8000 MPa |
|---|
| Elongation at Break | 1% |
|---|
| Flexural Modulus | 7500 MPa |
|---|
| Flexural Stress at Yield | 120.0 MPa |
|---|
| Flexural Strength | 120 MPa |
|---|
| Izod Impact (Notched) | 22 J/m |
|---|
| Price | $32.39 |
|---|
Handling & Printing Notes
With a viscosity of 650 mPa·s, this resin may benefit from slight warming before use in colder environments. The solid density of 1.6 g/cm³ is typical for photopolymer resins, indicating a heavier, denser cured part. Always refer to the official technical datasheet from Siraya Tech for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About Siraya Tech
Engineering-grade resins for functional prototypes and end-use parts. Specialized in tough, durable, and flexible materials.
Headquarters: California, USA
View all resins from Siraya Tech →
Frequently Asked Questions
What is Sculpt Ultra used for?
Sculpt Ultra is primarily suited for rigid, detailed prints. Its 99D Shore hardness means it is very rigid, making it a good choice for demanding 3D printing applications and is available in Ultra White.
How much does Sculpt Ultra cost?
Sculpt Ultra is priced at approximately $32.39. Check Siraya Tech's website or authorised retailers for current pricing and availability.
What shore hardness is Sculpt Ultra?
Sculpt Ultra has a shore hardness of 99D, which classifies it as very rigid compared to most other resins.
← Browse all resins |
All resins from Siraya Tech →