Simple V2 - Water Washable Resin
Manufacturer: Siraya Tech
Type: Simple V2 Water Washable
Simple V2 - Water Washable Resin is a Simple V2 Water Washable resin manufactured by Siraya Tech, engineering-grade resins for functional prototypes and end-use parts. With a shore hardness of 78D, and tensile stress at yield of 29 MPa, and 10% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. available in Grey, Aqua Gray, priced at approximately $25.19.
Key Properties
- Hardness: 78D Shore — hard/durable
- Tensile Strength: 29 MPa at yield — low tensile strength
- Elongation at Break: 10% — minimal stretch — rigid
- Viscosity: 170 mPa·s — low — easy to pour and clean
- Impact Resistance: 18 J/m — low impact toughness
Best Applications for Simple V2 - Water Washable Resin
- Miniatures, jewellery masters, dental models, and detailed prototypes
Technical Specifications
Technical data for Simple V2 - Water Washable Resin| Resin Type | Simple V2 Water Washable |
|---|
| Shore Hardness | 78D |
|---|
| Viscosity | 170 mPa·s |
|---|
| Solid Density | 1.2 g/cm³ |
|---|
| Colour Options | Grey, Aqua Gray |
|---|
| Tensile Stress at Yield | 29 MPa |
|---|
| Tensile Stress at Break | 27.0 MPa |
|---|
| Tensile Strength | 27 MPa |
|---|
| Young's Modulus | 750 MPa |
|---|
| Elongation at Break | 10% |
|---|
| Flexural Modulus | 950 MPa |
|---|
| Izod Impact (Notched) | 18 J/m |
|---|
| Price | $25.19 |
|---|
Handling & Printing Notes
With a viscosity of 170 mPa·s, this resin pours easily and requires minimal heating. The solid density of 1.2 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from Siraya Tech for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About Siraya Tech
Engineering-grade resins for functional prototypes and end-use parts. Specialized in tough, durable, and flexible materials.
Headquarters: California, USA
View all resins from Siraya Tech →
Frequently Asked Questions
What is Simple V2 - Water Washable Resin used for?
Simple V2 - Water Washable Resin is primarily suited for general-purpose 3D printing. Its 78D Shore hardness means it is hard/durable, making it a good choice for demanding 3D printing applications and is available in Grey, Aqua Gray.
How much does Simple V2 - Water Washable Resin cost?
Simple V2 - Water Washable Resin is priced at approximately $25.19. Check Siraya Tech's website or authorised retailers for current pricing and availability.
What shore hardness is Simple V2 - Water Washable Resin?
Simple V2 - Water Washable Resin has a shore hardness of 78D, which classifies it as hard/durable compared to most other resins.
← Browse all resins |
All resins from Siraya Tech →