SUNLU High Temperature Plus Resin
Manufacturer: SUNLU
Type: High-Temperature
SUNLU High Temperature Plus Resin is a High-Temperature resin manufactured by SUNLU, budget-friendly 3D printing resins and filaments for hobbyists and makers. With a shore hardness of 87D, and 7% elongation at break, this resin is designed for applications requiring rigid, detailed prints. priced at approximately $47.51.
Key Properties
- Hardness: 87D Shore — very rigid
- Elongation at Break: 7% — minimal stretch — rigid
- Viscosity: 200 mPa·s — medium — flows well at room temperature
- Impact Resistance: 25 J/m — moderate impact toughness
Best Applications for SUNLU High Temperature Plus Resin
- Miniatures, jewellery masters, dental models, and detailed prototypes
Technical Specifications
Technical data for SUNLU High Temperature Plus Resin| Resin Type | High-Temperature |
|---|
| Shore Hardness | 87D |
|---|
| Viscosity | 200-500 mPa·s |
|---|
| Solid Density | 1.34 g/cm³ |
|---|
| Tensile Stress at Break | 32 MPa |
|---|
| Tensile Strength | 32 MPa |
|---|
| Elongation at Break | 7% |
|---|
| Flexural Modulus | 3832 MPa |
|---|
| Flexural Stress at Break | 82 MPa |
|---|
| Flexural Strength | 82 MPa |
|---|
| Izod Impact (Notched) | 25 J/m |
|---|
| Price | $47.51 |
|---|
Handling & Printing Notes
With a viscosity of 200 mPa·s, this resin flows well at room temperature. The solid density of 1.34 g/cm³ is typical for photopolymer resins, indicating a heavier, denser cured part. Always refer to the official technical datasheet from SUNLU for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About SUNLU
Budget-friendly 3D printing resins and filaments for hobbyists and makers.
Headquarters: Shenzhen, China
View all resins from SUNLU →
Frequently Asked Questions
What is SUNLU High Temperature Plus Resin used for?
SUNLU High Temperature Plus Resin is primarily suited for rigid, detailed prints. Its 87D Shore hardness means it is very rigid, making it a good choice for demanding 3D printing applications.
How much does SUNLU High Temperature Plus Resin cost?
SUNLU High Temperature Plus Resin is priced at approximately $47.51. Check SUNLU's website or authorised retailers for current pricing and availability.
What shore hardness is SUNLU High Temperature Plus Resin?
SUNLU High Temperature Plus Resin has a shore hardness of 87D, which classifies it as very rigid compared to most other resins.
← Browse all resins |
All resins from SUNLU →