SUNLU Standard Plus Resin
Manufacturer: SUNLU
Type: Standard
SUNLU Standard Plus Resin is a Standard resin manufactured by SUNLU, budget-friendly 3D printing resins and filaments for hobbyists and makers. With a shore hardness of 84D, and 15% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. priced at approximately $19.99.
Key Properties
- Hardness: 84D Shore — very rigid
- Elongation at Break: 15% — minimal stretch — rigid
- Viscosity: 200 mPa·s — medium — flows well at room temperature
- Impact Resistance: 38 J/m — moderate impact toughness
Best Applications for SUNLU Standard Plus Resin
- General-purpose SLA/MSLA 3D printing projects
- Rapid prototyping and modelling
Technical Specifications
Technical data for SUNLU Standard Plus Resin| Resin Type | Standard |
|---|
| Shore Hardness | 84D |
|---|
| Viscosity | 200-400 mPa·s |
|---|
| Solid Density | 1.18 g/cm³ |
|---|
| Tensile Stress at Break | 31 MPa |
|---|
| Tensile Strength | 31 MPa |
|---|
| Elongation at Break | 15% |
|---|
| Flexural Modulus | 1225 MPa |
|---|
| Flexural Stress at Break | 35 MPa |
|---|
| Flexural Strength | 35 MPa |
|---|
| Izod Impact (Notched) | 38 J/m |
|---|
| Price | $19.99 |
|---|
Handling & Printing Notes
With a viscosity of 200 mPa·s, this resin flows well at room temperature. The solid density of 1.18 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from SUNLU for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About SUNLU
Budget-friendly 3D printing resins and filaments for hobbyists and makers.
Headquarters: Shenzhen, China
View all resins from SUNLU →
Frequently Asked Questions
What is SUNLU Standard Plus Resin used for?
SUNLU Standard Plus Resin is primarily suited for general-purpose 3D printing. Its 84D Shore hardness means it is very rigid, making it a good choice for demanding 3D printing applications.
How much does SUNLU Standard Plus Resin cost?
SUNLU Standard Plus Resin is priced at approximately $19.99. Check SUNLU's website or authorised retailers for current pricing and availability.
What shore hardness is SUNLU Standard Plus Resin?
SUNLU Standard Plus Resin has a shore hardness of 84D, which classifies it as very rigid compared to most other resins.
← Browse all resins |
All resins from SUNLU →