SUNLU Water Washable Standard Resin
Manufacturer: SUNLU
Type: Water Washable Standard Resin
SUNLU Water Washable Standard Resin is a Water Washable Standard Resin resin manufactured by SUNLU, budget-friendly 3D printing resins and filaments for hobbyists and makers. With a shore hardness of 80D, and 10% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. available in Black, White, Gray (Light Gray), Dark Gray, Skin Tone, Orange, Green, Transparent, Transparent Blue, Transparent Red, Transparent Green, priced at approximately $32.22.
Key Properties
- Hardness: 80D Shore — very rigid
- Elongation at Break: 10% — minimal stretch — rigid
- Viscosity: 200 mPa·s — medium — flows well at room temperature
- Impact Resistance: 40 J/m — good impact toughness
Best Applications for SUNLU Water Washable Standard Resin
- Miniatures, jewellery masters, dental models, and detailed prototypes
Technical Specifications
Technical data for SUNLU Water Washable Standard Resin| Resin Type | Water Washable Standard Resin |
|---|
| Shore Hardness | 80D |
|---|
| Viscosity | 200-600 mPa·s |
|---|
| Solid Density | 1.22 g/cm³ |
|---|
| Colour Options | Black, White, Gray (Light Gray), Dark Gray, Skin Tone, Orange, Green, Transparent, Transparent Blue, Transparent Red, Transparent Green |
|---|
| Tensile Stress at Break | 25 MPa |
|---|
| Tensile Strength | 25 MPa |
|---|
| Elongation at Break | 10% |
|---|
| Flexural Modulus | 985 MPa |
|---|
| Flexural Stress at Break | 35 MPa |
|---|
| Flexural Strength | 35 MPa |
|---|
| Izod Impact (Notched) | 40 J/m |
|---|
| Price | $32.22 |
|---|
Handling & Printing Notes
With a viscosity of 200 mPa·s, this resin flows well at room temperature. The solid density of 1.22 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from SUNLU for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About SUNLU
Budget-friendly 3D printing resins and filaments for hobbyists and makers.
Headquarters: Shenzhen, China
View all resins from SUNLU →
Frequently Asked Questions
What is SUNLU Water Washable Standard Resin used for?
SUNLU Water Washable Standard Resin is primarily suited for general-purpose 3D printing. Its 80D Shore hardness means it is very rigid, making it a good choice for demanding 3D printing applications and is available in Black, White, Gray (Light Gray), Dark Gray, Skin Tone, Orange, Green, Transparent, Transparent Blue, Transparent Red, Transparent Green.
How much does SUNLU Water Washable Standard Resin cost?
SUNLU Water Washable Standard Resin is priced at approximately $32.22. Check SUNLU's website or authorised retailers for current pricing and availability.
What shore hardness is SUNLU Water Washable Standard Resin?
SUNLU Water Washable Standard Resin has a shore hardness of 80D, which classifies it as very rigid compared to most other resins.
← Browse all resins |
All resins from SUNLU →