zDental Try-In
Manufacturer: UNIZ
Type: Dental Try-In
zDental Try-In is a Dental Try-In resin manufactured by UNIZ, uNIZ develops high-speed LCD/SLA 3D printers and a range of resins for dental, engineering, and general applications. With a shore hardness of 92D, and 2.5% elongation at break, this resin is designed for applications requiring rigid, detailed prints. available in Pink, priced at approximately $129.00.
Key Properties
- Hardness: 92D Shore — very rigid
- Elongation at Break: 2.5% — minimal stretch — rigid
- Viscosity: 589 mPa·s — medium-high — may benefit from slight warming before use
Best Applications for zDental Try-In
- Miniatures, jewellery masters, dental models, and detailed prototypes
Technical Specifications
Technical data for zDental Try-In| Resin Type | Dental Try-In |
|---|
| Shore Hardness | 92D |
|---|
| Viscosity | 589 mPa·s |
|---|
| Solid Density | g/cm³ |
|---|
| Colour Options | Pink |
|---|
| Tensile Strength | 50.2 MPa |
|---|
| Young's Modulus | 4057.1 MPa |
|---|
| Elongation at Break | 2.5% |
|---|
| Flexural Modulus | 3311.4 MPa |
|---|
| Flexural Strength | 109.1 MPa |
|---|
| Price | $129.00 |
|---|
Handling & Printing Notes
With a viscosity of 589 mPa·s, this resin may benefit from slight warming before use in colder environments. Always refer to the official technical datasheet from UNIZ for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About UNIZ
UNIZ develops high-speed LCD/SLA 3D printers and a range of resins for dental, engineering, and general applications.
Headquarters: San Diego, California, USA
View all resins from UNIZ →
Frequently Asked Questions
What is zDental Try-In used for?
zDental Try-In is primarily suited for rigid, detailed prints. Its 92D Shore hardness means it is very rigid, making it a good choice for demanding 3D printing applications and is available in Pink.
How much does zDental Try-In cost?
zDental Try-In is priced at approximately $129.00. Check UNIZ's website or authorised retailers for current pricing and availability.
What shore hardness is zDental Try-In?
zDental Try-In has a shore hardness of 92D, which classifies it as very rigid compared to most other resins.
← Browse all resins |
All resins from UNIZ →