Resin BASIC (White/Ivory & Grey)
Manufacturer: Zortrax
Type: Zortrax Resin BASIC (White/Ivory & Grey)
Resin BASIC (White/Ivory & Grey) is a Zortrax Resin BASIC (White/Ivory & Grey) resin manufactured by Zortrax, professional 3D printing ecosystem with dedicated resins for engineering and design. With a shore hardness of 88D, and 11% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. available in Grey, White/Ivory, priced at approximately $53.41.
Key Properties
- Hardness: 88D Shore — very rigid
- Elongation at Break: 11% — minimal stretch — rigid
- Viscosity: 150 mPa·s — low — easy to pour and clean
- Impact Resistance: 44 J/m — good impact toughness
Best Applications for Resin BASIC (White/Ivory & Grey)
- Miniatures, jewellery masters, dental models, and detailed prototypes
Technical Specifications
Technical data for Resin BASIC (White/Ivory & Grey)| Resin Type | Zortrax Resin BASIC (White/Ivory & Grey) |
|---|
| Shore Hardness | 88D |
|---|
| Viscosity | 150 - 200 mPa·s |
|---|
| Solid Density | 1.05 - 1.13 g/cm³ |
|---|
| Colour Options | Grey, White/Ivory |
|---|
| Tensile Stress at Break | 36 - 52 MPa |
|---|
| Tensile Strength | 36 - 52 MPa |
|---|
| Young's Modulus | 1779 - 2385 MPa |
|---|
| Elongation at Break | 11 - 20% |
|---|
| Flexural Modulus | 1882 - 2385 MPa |
|---|
| Flexural Stress at Break | 59 - 70 MPa |
|---|
| Flexural Strength | 59 - 70 MPa |
|---|
| Izod Impact (Notched) | 44 - 49 J/m |
|---|
| Price | $53.41 |
|---|
Handling & Printing Notes
With a viscosity of 150 mPa·s, this resin pours easily and requires minimal heating. The solid density of 1.05 g/cm³ is typical for photopolymer resins, resulting in lighter cured parts. Always refer to the official technical datasheet from Zortrax for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About Zortrax
Professional 3D printing ecosystem with dedicated resins for engineering and design.
Headquarters: Olsztyn, Poland
View all resins from Zortrax →
Frequently Asked Questions
What is Resin BASIC (White/Ivory & Grey) used for?
Resin BASIC (White/Ivory & Grey) is primarily suited for general-purpose 3D printing. Its 88D Shore hardness means it is very rigid, making it a good choice for demanding 3D printing applications and is available in Grey, White/Ivory.
How much does Resin BASIC (White/Ivory & Grey) cost?
Resin BASIC (White/Ivory & Grey) is priced at approximately $53.41. Check Zortrax's website or authorised retailers for current pricing and availability.
What shore hardness is Resin BASIC (White/Ivory & Grey)?
Resin BASIC (White/Ivory & Grey) has a shore hardness of 88D, which classifies it as very rigid compared to most other resins.
← Browse all resins |
All resins from Zortrax →