DMD-21
Manufacturer: AmeraLabs
Type: Dental Model
DMD-21 is a Dental Model resin manufactured by AmeraLabs, ameraLabs develops and manufactures high-quality 3D printing resins for MSLA resin 3D printers. With a shore hardness of 79D, and 2.6% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. available in Sand, priced at approximately $40.00.
Key Properties
- Hardness: 79D Shore — hard/durable
- Elongation at Break: 2.6% — minimal stretch — rigid
- Viscosity: 370 mPa·s — medium — flows well at room temperature
- Impact Resistance: 0.96 J/m — low impact toughness
Best Applications for DMD-21
- Miniatures, jewellery masters, dental models, and detailed prototypes
Technical Specifications
Technical data for DMD-21| Resin Type | Dental Model |
|---|
| Shore Hardness | 79D |
|---|
| Viscosity | 370 mPa·s |
|---|
| Solid Density | 1.237 g/cm³ |
|---|
| Colour Options | Sand |
|---|
| Tensile Stress at Break | 65.6 MPa |
|---|
| Young's Modulus | 3420.0 MPa |
|---|
| Elongation at Break | 2.6% |
|---|
| Flexural Modulus | 3160.0 MPa |
|---|
| Flexural Stress at Yield | 95.9 MPa |
|---|
| Izod Impact (Notched) | 0.96 J/m |
|---|
| Price | $40.00 |
|---|
Handling & Printing Notes
With a viscosity of 370 mPa·s, this resin flows well at room temperature. The solid density of 1.237 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from AmeraLabs for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About AmeraLabs
AmeraLabs develops and manufactures high-quality 3D printing resins for MSLA resin 3D printers. Products cover miniatures, dental, engineering, and specialty applications.
Headquarters: Lithuania
View all resins from AmeraLabs →
Frequently Asked Questions
What is DMD-21 used for?
DMD-21 is primarily suited for general-purpose 3D printing. Its 79D Shore hardness means it is hard/durable, making it a good choice for demanding 3D printing applications and is available in Sand.
How much does DMD-21 cost?
DMD-21 is priced at approximately $40.00. Check AmeraLabs's website or authorised retailers for current pricing and availability.
What shore hardness is DMD-21?
DMD-21 has a shore hardness of 79D, which classifies it as hard/durable compared to most other resins.
← Browse all resins |
All resins from AmeraLabs →