DMD-31
Manufacturer: AmeraLabs
Type: Dental Model
DMD-31 is a Dental Model resin manufactured by AmeraLabs, ameraLabs develops and manufactures high-quality 3D printing resins for MSLA resin 3D printers. With a shore hardness of 88D, and 4% elongation at break, this resin is designed for applications requiring rigid, detailed prints. available in Beige (A2), Grey, priced at approximately $40.00.
Key Properties
- Hardness: 88D Shore — very rigid
- Elongation at Break: 4% — minimal stretch — rigid
- Viscosity: 670 mPa·s — medium-high — may benefit from slight warming before use
- Impact Resistance: 2.11 J/m — low impact toughness
Best Applications for DMD-31
- Miniatures, jewellery masters, dental models, and detailed prototypes
Technical Specifications
Technical data for DMD-31| Resin Type | Dental Model |
|---|
| Shore Hardness | 88D |
|---|
| Viscosity | 670 mPa·s |
|---|
| Solid Density | 1.23 g/cm³ |
|---|
| Colour Options | Beige (A2), Grey |
|---|
| Tensile Stress at Break | 61.6 MPa |
|---|
| Young's Modulus | 2820.0 MPa |
|---|
| Elongation at Break | 4% |
|---|
| Flexural Modulus | 2870.0 MPa |
|---|
| Flexural Stress at Yield | 108.8 MPa |
|---|
| Izod Impact (Notched) | 2.11 J/m |
|---|
| Price | $40.00 |
|---|
Handling & Printing Notes
With a viscosity of 670 mPa·s, this resin may benefit from slight warming before use in colder environments. The solid density of 1.23 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from AmeraLabs for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About AmeraLabs
AmeraLabs develops and manufactures high-quality 3D printing resins for MSLA resin 3D printers. Products cover miniatures, dental, engineering, and specialty applications.
Headquarters: Lithuania
View all resins from AmeraLabs →
Frequently Asked Questions
What is DMD-31 used for?
DMD-31 is primarily suited for rigid, detailed prints. Its 88D Shore hardness means it is very rigid, making it a good choice for demanding 3D printing applications and is available in Beige (A2), Grey.
How much does DMD-31 cost?
DMD-31 is priced at approximately $40.00. Check AmeraLabs's website or authorised retailers for current pricing and availability.
What shore hardness is DMD-31?
DMD-31 has a shore hardness of 88D, which classifies it as very rigid compared to most other resins.
← Browse all resins |
All resins from AmeraLabs →