DWS Flexa GM08B
Manufacturer: DWS
Type: Flexible
DWS Flexa GM08B is a Flexible resin manufactured by DWS, italian manufacturer of professional 3D printing systems and specialty resins for jewelry and dental. With a shore hardness of 55D, and 90% elongation at break, this resin is designed for applications requiring flexible and impact-resistant parts. priced at approximately —.
Key Properties
- Hardness: 55D Shore — semi-rigid
- Elongation at Break: 90% — stretches significantly before breaking — flexible
- Viscosity: 1,400 mPa·s — medium-high — may benefit from slight warming before use
Best Applications for DWS Flexa GM08B
- Flexible and impact-resistant parts
- Snap-fit components and living hinges
Technical Specifications
Technical data for DWS Flexa GM08B| Resin Type | Flexible |
|---|
| Shore Hardness | 55D |
|---|
| Viscosity | 1400 mPa·s |
|---|
| Solid Density | 1.01 g/cm³ |
|---|
| Tensile Stress at Break | 8 MPa |
|---|
| Tensile Strength | 8 MPa |
|---|
| Elongation at Break | 90% |
|---|
| Price | — |
|---|
Handling & Printing Notes
With a viscosity of 1,400 mPa·s, this resin may benefit from slight warming before use in colder environments. The solid density of 1.01 g/cm³ is typical for photopolymer resins, resulting in lighter cured parts. Always refer to the official technical datasheet from DWS for recommended print settings, exposure times, and post-curing instructions.
Similar Resins to Consider
About DWS
Italian manufacturer of professional 3D printing systems and specialty resins for jewelry and dental.
Headquarters: Thiene, Italy
View all resins from DWS →
Frequently Asked Questions
What is DWS Flexa GM08B used for?
DWS Flexa GM08B is primarily suited for flexible and impact-resistant parts. Its 55D Shore hardness means it is semi-rigid, making it a good choice for demanding 3D printing applications.
How much does DWS Flexa GM08B cost?
DWS Flexa GM08B is priced at approximately —. Check DWS's website or authorised retailers for current pricing and availability.
What shore hardness is DWS Flexa GM08B?
DWS Flexa GM08B has a shore hardness of 55D, which classifies it as semi-rigid compared to most other resins.
← Browse all resins |
All resins from DWS →