DWS Flexa GM10B
Manufacturer: DWS
Type: Flexible
DWS Flexa GM10B is a Flexible resin manufactured by DWS, italian manufacturer of professional 3D printing systems and specialty resins for jewelry and dental. With a shore hardness of 50D, and 180% elongation at break, this resin is designed for applications requiring flexible and impact-resistant parts. priced at approximately —.
Key Properties
- Hardness: 50D Shore — semi-rigid
- Elongation at Break: 180% — stretches significantly before breaking — flexible
- Viscosity: 7,500 mPa·s — high — benefits from pre-warming and longer drain times
Best Applications for DWS Flexa GM10B
- Flexible and impact-resistant parts
- Snap-fit components and living hinges
Technical Specifications
Technical data for DWS Flexa GM10B| Resin Type | Flexible |
|---|
| Shore Hardness | 50D |
|---|
| Viscosity | 7500 mPa·s |
|---|
| Solid Density | 1.01 g/cm³ |
|---|
| Tensile Stress at Break | 2 MPa |
|---|
| Tensile Strength | 2 MPa |
|---|
| Young's Modulus | 2 MPa |
|---|
| Elongation at Break | 180% |
|---|
| Price | — |
|---|
Handling & Printing Notes
With a viscosity of 7,500 mPa·s, this resin benefits from pre-warming and longer drain times after printing. The solid density of 1.01 g/cm³ is typical for photopolymer resins, resulting in lighter cured parts. Always refer to the official technical datasheet from DWS for recommended print settings, exposure times, and post-curing instructions.
Similar Resins to Consider
About DWS
Italian manufacturer of professional 3D printing systems and specialty resins for jewelry and dental.
Headquarters: Thiene, Italy
View all resins from DWS →
Frequently Asked Questions
What is DWS Flexa GM10B used for?
DWS Flexa GM10B is primarily suited for flexible and impact-resistant parts. Its 50D Shore hardness means it is semi-rigid, making it a good choice for demanding 3D printing applications.
How much does DWS Flexa GM10B cost?
DWS Flexa GM10B is priced at approximately —. Check DWS's website or authorised retailers for current pricing and availability.
What shore hardness is DWS Flexa GM10B?
DWS Flexa GM10B has a shore hardness of 50D, which classifies it as semi-rigid compared to most other resins.
← Browse all resins |
All resins from DWS →