UltraPrint PARP10 Rapid Prototyping Modeling Resin (Orange Clay)
Manufacturer: HeyGears
Type: Modeling
UltraPrint PARP10 Rapid Prototyping Modeling Resin (Orange Clay) is a Modeling resin manufactured by HeyGears, heyGears produces 3D printers and resins for dental, jewelry, and general purpose applications. With 15% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. available in Orange Clay, priced at approximately $59.00.
Key Properties
- Elongation at Break: 15% — minimal stretch — rigid
- Viscosity: 320 mPa·s — medium — flows well at room temperature
Best Applications for UltraPrint PARP10 Rapid Prototyping Modeling Resin (Orange Clay)
- General-purpose SLA/MSLA 3D printing projects
- Rapid prototyping and modelling
Technical Specifications
Technical data for UltraPrint PARP10 Rapid Prototyping Modeling Resin (Orange Clay)| Resin Type | Modeling |
|---|
| Shore Hardness | 84 Shore D |
|---|
| Viscosity | 320 mPa·s mPa·s |
|---|
| Solid Density | g/cm³ |
|---|
| Colour Options | Orange Clay |
|---|
| Tensile Strength | 55 MPa MPa |
|---|
| Young's Modulus | 1750 MPa MPa |
|---|
| Elongation at Break | 15%% |
|---|
| Flexural Modulus | 1830 MPa MPa |
|---|
| Flexural Strength | 80 MPa MPa |
|---|
| Price | $59.00 |
|---|
Handling & Printing Notes
With a viscosity of 320 mPa·s, this resin flows well at room temperature. Always refer to the official technical datasheet from HeyGears for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About HeyGears
HeyGears produces 3D printers and resins for dental, jewelry, and general purpose applications.
Headquarters: China
View all resins from HeyGears →
Frequently Asked Questions
What is UltraPrint PARP10 Rapid Prototyping Modeling Resin (Orange Clay) used for?
UltraPrint PARP10 Rapid Prototyping Modeling Resin (Orange Clay) is primarily suited for general-purpose 3D printing. making it a good choice for demanding 3D printing applications and is available in Orange Clay.
How much does UltraPrint PARP10 Rapid Prototyping Modeling Resin (Orange Clay) cost?
UltraPrint PARP10 Rapid Prototyping Modeling Resin (Orange Clay) is priced at approximately $59.00. Check HeyGears's website or authorised retailers for current pricing and availability.
← Browse all resins |
All resins from HeyGears →