Bio-Med Clear
Manufacturer: Liqcreate
Type: Bio-Med Clear
Bio-Med Clear is a Bio-Med Clear resin manufactured by Liqcreate, professional 3D printing resins for engineering, dental, and jewelry applications. With a shore hardness of 85D, and 5% elongation at break, this resin is designed for applications requiring rigid, detailed prints. available in Clear, priced at approximately $38.04.
Key Properties
- Hardness: 85D Shore — very rigid
- Elongation at Break: 5% — minimal stretch — rigid
- Viscosity: 475 mPa·s — medium — flows well at room temperature
- Impact Resistance: 28 J/m — moderate impact toughness
Best Applications for Bio-Med Clear
- Miniatures, jewellery masters, dental models, and detailed prototypes
Technical Specifications
Technical data for Bio-Med Clear| Resin Type | Bio-Med Clear |
|---|
| Shore Hardness | 85D |
|---|
| Viscosity | 475 mPa·s |
|---|
| Solid Density | 1.18 g/cm³ |
|---|
| Colour Options | Clear |
|---|
| Tensile Stress at Break | 55.0 MPa |
|---|
| Tensile Strength | 55 MPa |
|---|
| Young's Modulus | 2000 MPa |
|---|
| Elongation at Break | 5-10% |
|---|
| Flexural Modulus | 2200 MPa |
|---|
| Flexural Stress at Break | 89.0 MPa |
|---|
| Flexural Strength | 89 MPa |
|---|
| Izod Impact (Notched) | 28 J/m |
|---|
| Price | $38.04 |
|---|
Handling & Printing Notes
With a viscosity of 475 mPa·s, this resin flows well at room temperature. The solid density of 1.18 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from Liqcreate for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About Liqcreate
Professional 3D printing resins for engineering, dental, and jewelry applications.
Headquarters: Utrecht, Netherlands
View all resins from Liqcreate →
Frequently Asked Questions
What is Bio-Med Clear used for?
Bio-Med Clear is primarily suited for rigid, detailed prints. Its 85D Shore hardness means it is very rigid, making it a good choice for demanding 3D printing applications and is available in Clear.
How much does Bio-Med Clear cost?
Bio-Med Clear is priced at approximately $38.04. Check Liqcreate's website or authorised retailers for current pricing and availability.
What shore hardness is Bio-Med Clear?
Bio-Med Clear has a shore hardness of 85D, which classifies it as very rigid compared to most other resins.
← Browse all resins |
All resins from Liqcreate →