Composite-X
Manufacturer: Liqcreate
Type: Standard Resin
Composite-X is a Standard Resin resin manufactured by Liqcreate, professional 3D printing resins for engineering, dental, and jewelry applications. With a shore hardness of 93D, and 1% elongation at break, this resin is designed for applications requiring rigid, detailed prints. priced at approximately €199.99.
Key Properties
- Hardness: 93D Shore — very rigid
- Elongation at Break: 1% — minimal stretch — rigid
- Viscosity: 1,400 mPa·s — medium-high — may benefit from slight warming before use
- Impact Resistance: 19 J/m — low impact toughness
Best Applications for Composite-X
- Miniatures, jewellery masters, dental models, and detailed prototypes
Technical Specifications
Technical data for Composite-X| Resin Type | Standard Resin |
|---|
| Shore Hardness | 93D |
|---|
| Viscosity | 1400 mPa·s |
|---|
| Solid Density | 1.62 g/cm³ |
|---|
| Tensile Strength | 50-75 MPa |
|---|
| Young's Modulus | 7500.0 MPa |
|---|
| Elongation at Break | 1% |
|---|
| Flexural Modulus | 7500-8500 MPa |
|---|
| Flexural Strength | 140-150 MPa |
|---|
| Izod Impact (Notched) | 19 J/m |
|---|
| Price | €199.99 |
|---|
Handling & Printing Notes
With a viscosity of 1,400 mPa·s, this resin may benefit from slight warming before use in colder environments. The solid density of 1.62 g/cm³ is typical for photopolymer resins, indicating a heavier, denser cured part. Always refer to the official technical datasheet from Liqcreate for recommended print settings, exposure times, and post-curing instructions.
Similar Resins to Consider
About Liqcreate
Professional 3D printing resins for engineering, dental, and jewelry applications.
Headquarters: Utrecht, Netherlands
View all resins from Liqcreate →
Frequently Asked Questions
What is Composite-X used for?
Composite-X is primarily suited for rigid, detailed prints. Its 93D Shore hardness means it is very rigid, making it a good choice for demanding 3D printing applications.
How much does Composite-X cost?
Composite-X is priced at approximately €199.99. Check Liqcreate's website or authorised retailers for current pricing and availability.
What shore hardness is Composite-X?
Composite-X has a shore hardness of 93D, which classifies it as very rigid compared to most other resins.
← Browse all resins |
All resins from Liqcreate →