LOCTITE 3D IND405
Manufacturer: Loctite (Henkel)
Type: Tough (Industrial)
LOCTITE 3D IND405 is a Tough (Industrial) resin manufactured by Loctite (Henkel), industrial-grade 3D printing resins from Henkel's Loctite brand for engineering applications. With a shore hardness of 76D, and tensile stress at yield of 42 MPa, and 96% elongation at break, this resin is designed for applications requiring tough, impact-resistant applications. available in Clear, Black, priced at approximately $299.00.
Key Properties
- Hardness: 76D Shore — hard/durable
- Tensile Strength: 42 MPa at yield — moderate tensile strength
- Elongation at Break: 96% — stretches significantly before breaking — flexible
- Viscosity: 2,000 mPa·s — high — benefits from pre-warming and longer drain times
- Impact Resistance: 72 J/m — excellent impact toughness
Best Applications for LOCTITE 3D IND405
- Flexible and impact-resistant parts
- Snap-fit components and living hinges
- Tough enclosures, protective covers, and impact-resistant parts
Technical Specifications
Technical data for LOCTITE 3D IND405| Resin Type | Tough (Industrial) |
|---|
| Shore Hardness | 76D |
|---|
| Viscosity | 2000-2600 mPa·s |
|---|
| Solid Density | 1.134 g/cm³ |
|---|
| Colour Options | Clear, Black |
|---|
| Tensile Stress at Yield | 42±1 MPa |
|---|
| Tensile Stress at Break | 38 MPa (Clear) / 45 MPa (Black) MPa |
|---|
| Tensile Strength | 38±2 MPa |
|---|
| Young's Modulus | 1429±52 MPa |
|---|
| Elongation at Break | 96±4% |
|---|
| Flexural Modulus | 1287±57 MPa |
|---|
| Izod Impact (Notched) | 72±2 J/m |
|---|
| Price | $299.00 |
|---|
Handling & Printing Notes
With a viscosity of 2,000 mPa·s, this resin benefits from pre-warming and longer drain times after printing. The solid density of 1.134 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from Loctite (Henkel) for recommended print settings, exposure times, and post-curing instructions.
Similar Resins to Consider
Frequently Asked Questions
What is LOCTITE 3D IND405 used for?
LOCTITE 3D IND405 is primarily suited for tough, impact-resistant applications. Its 76D Shore hardness means it is hard/durable, making it a good choice for demanding 3D printing applications and is available in Clear, Black.
How much does LOCTITE 3D IND405 cost?
LOCTITE 3D IND405 is priced at approximately $299.00. Check Loctite (Henkel)'s website or authorised retailers for current pricing and availability.
What shore hardness is LOCTITE 3D IND405?
LOCTITE 3D IND405 has a shore hardness of 76D, which classifies it as hard/durable compared to most other resins.
← Browse all resins |
All resins from Loctite (Henkel) →