LOCTITE 3D IND475
Manufacturer: Loctite (Henkel)
Type: Elastomer
LOCTITE 3D IND475 is a Elastomer resin manufactured by Loctite (Henkel), industrial-grade 3D printing resins from Henkel's Loctite brand for engineering applications. With a shore hardness of 62A, and 201% elongation at break, this resin is designed for applications requiring flexible/rubber-like applications. available in Black, White, priced at approximately $349.00.
Key Properties
- Hardness: 62A Shore — rubber-like
- Elongation at Break: 201% — stretches significantly before breaking — flexible
- Viscosity: 900 mPa·s — medium-high — may benefit from slight warming before use
Best Applications for LOCTITE 3D IND475
- Flexible parts, gaskets, seals, and cushioning
- Rubber-like models and wearable prototypes
Technical Specifications
Technical data for LOCTITE 3D IND475| Resin Type | Elastomer |
|---|
| Shore Hardness | 62A |
|---|
| Viscosity | 900-1700 mPa·s |
|---|
| Solid Density | 1.06 g/cm³ |
|---|
| Colour Options | Black, White |
|---|
| Tensile Stress at Break | 140 MPa (Black) / 160 MPa (White) MPa |
|---|
| Tensile Strength | 3.1±0.3 MPa |
|---|
| Young's Modulus | 1.1±0.5 MPa |
|---|
| Elongation at Break | 201±16% |
|---|
| Flexural Modulus | MPa |
|---|
| Izod Impact (Notched) | J/m |
|---|
| Price | $349.00 |
|---|
Handling & Printing Notes
With a viscosity of 900 mPa·s, this resin may benefit from slight warming before use in colder environments. The solid density of 1.06 g/cm³ is typical for photopolymer resins, resulting in lighter cured parts. Always refer to the official technical datasheet from Loctite (Henkel) for recommended print settings, exposure times, and post-curing instructions.
Similar Resins to Consider
Frequently Asked Questions
What is LOCTITE 3D IND475 used for?
LOCTITE 3D IND475 is primarily suited for flexible/rubber-like applications. Its 62A Shore hardness means it is rubber-like, making it a good choice for demanding 3D printing applications and is available in Black, White.
How much does LOCTITE 3D IND475 cost?
LOCTITE 3D IND475 is priced at approximately $349.00. Check Loctite (Henkel)'s website or authorised retailers for current pricing and availability.
What shore hardness is LOCTITE 3D IND475?
LOCTITE 3D IND475 has a shore hardness of 62A, which classifies it as rubber-like compared to most other resins.
← Browse all resins |
All resins from Loctite (Henkel) →