LOCTITE 3D IND5714
Manufacturer: Loctite (Henkel)
Type: Elastomer
LOCTITE 3D IND5714 is a Elastomer resin manufactured by Loctite (Henkel), industrial-grade 3D printing resins from Henkel's Loctite brand for engineering applications. With a shore hardness of 53A, and 130% elongation at break, this resin is designed for applications requiring flexible/rubber-like applications. available in Gray, priced at approximately $349.00.
Key Properties
- Hardness: 53A Shore — rubber-like
- Elongation at Break: 130% — stretches significantly before breaking — flexible
- Viscosity: 2,000 mPa·s — high — benefits from pre-warming and longer drain times
Best Applications for LOCTITE 3D IND5714
- Flexible parts, gaskets, seals, and cushioning
- Rubber-like models and wearable prototypes
Technical Specifications
Technical data for LOCTITE 3D IND5714| Resin Type | Elastomer |
|---|
| Shore Hardness | 53A |
|---|
| Viscosity | 2000-2900 mPa·s |
|---|
| Solid Density | 1.04 g/cm³ |
|---|
| Colour Options | Gray |
|---|
| Tensile Stress at Break | 190 MPa MPa |
|---|
| Tensile Strength | 1.4 MPa |
|---|
| Young's Modulus | 4.1-4.9 MPa |
|---|
| Elongation at Break | 130-143% |
|---|
| Flexural Modulus | MPa |
|---|
| Izod Impact (Notched) | J/m |
|---|
| Price | $349.00 |
|---|
Handling & Printing Notes
With a viscosity of 2,000 mPa·s, this resin benefits from pre-warming and longer drain times after printing. The solid density of 1.04 g/cm³ is typical for photopolymer resins, resulting in lighter cured parts. Always refer to the official technical datasheet from Loctite (Henkel) for recommended print settings, exposure times, and post-curing instructions.
Similar Resins to Consider
Frequently Asked Questions
What is LOCTITE 3D IND5714 used for?
LOCTITE 3D IND5714 is primarily suited for flexible/rubber-like applications. Its 53A Shore hardness means it is rubber-like, making it a good choice for demanding 3D printing applications and is available in Gray.
How much does LOCTITE 3D IND5714 cost?
LOCTITE 3D IND5714 is priced at approximately $349.00. Check Loctite (Henkel)'s website or authorised retailers for current pricing and availability.
What shore hardness is LOCTITE 3D IND5714?
LOCTITE 3D IND5714 has a shore hardness of 53A, which classifies it as rubber-like compared to most other resins.
← Browse all resins |
All resins from Loctite (Henkel) →