LOCTITE 3D MED412
Manufacturer: Loctite (Henkel)
Type: Medical
LOCTITE 3D MED412 is a Medical resin manufactured by Loctite (Henkel), industrial-grade 3D printing resins from Henkel's Loctite brand for engineering applications. With a shore hardness of 70D, and tensile stress at yield of 30 MPa, and 105% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. available in Clear, White, priced at approximately $399.00.
Key Properties
- Hardness: 70D Shore — hard/durable
- Tensile Strength: 30 MPa at yield — low tensile strength
- Elongation at Break: 105% — stretches significantly before breaking — flexible
- Viscosity: 500 mPa·s — medium-high — may benefit from slight warming before use
- Impact Resistance: 47 J/m — good impact toughness
Best Applications for LOCTITE 3D MED412
- Flexible and impact-resistant parts
- Snap-fit components and living hinges
Technical Specifications
Technical data for LOCTITE 3D MED412| Resin Type | Medical |
|---|
| Shore Hardness | 70D |
|---|
| Viscosity | 500-800 mPa·s |
|---|
| Solid Density | 1.1 g/cm³ |
|---|
| Colour Options | Clear, White |
|---|
| Tensile Stress at Yield | 30-38 MPa |
|---|
| Tensile Stress at Break | 37 MPa (Clear) / 28 MPa (White) MPa |
|---|
| Tensile Strength | 35-40 MPa |
|---|
| Young's Modulus | 1250-1400 MPa |
|---|
| Elongation at Break | 105-115% |
|---|
| Flexural Modulus | MPa |
|---|
| Izod Impact (Notched) | 47-52 J/m |
|---|
| Price | $399.00 |
|---|
Handling & Printing Notes
With a viscosity of 500 mPa·s, this resin may benefit from slight warming before use in colder environments. The solid density of 1.1 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from Loctite (Henkel) for recommended print settings, exposure times, and post-curing instructions.
Similar Resins to Consider
Frequently Asked Questions
What is LOCTITE 3D MED412 used for?
LOCTITE 3D MED412 is primarily suited for general-purpose 3D printing. Its 70D Shore hardness means it is hard/durable, making it a good choice for demanding 3D printing applications and is available in Clear, White.
How much does LOCTITE 3D MED412 cost?
LOCTITE 3D MED412 is priced at approximately $399.00. Check Loctite (Henkel)'s website or authorised retailers for current pricing and availability.
What shore hardness is LOCTITE 3D MED412?
LOCTITE 3D MED412 has a shore hardness of 70D, which classifies it as hard/durable compared to most other resins.
← Browse all resins |
All resins from Loctite (Henkel) →