LOCTITE 3D MED414
Manufacturer: Loctite (Henkel)
Type: Medical
LOCTITE 3D MED414 is a Medical resin manufactured by Loctite (Henkel), industrial-grade 3D printing resins from Henkel's Loctite brand for engineering applications. With a shore hardness of 51A, and 220% elongation at break, this resin is designed for applications requiring flexible/rubber-like applications. available in Blue, Clear, Red, priced at approximately $399.00.
Key Properties
- Hardness: 51A Shore — rubber-like
- Elongation at Break: 220% — stretches significantly before breaking — flexible
- Viscosity: 1,600 mPa·s — high — benefits from pre-warming and longer drain times
Best Applications for LOCTITE 3D MED414
- Flexible parts, gaskets, seals, and cushioning
- Rubber-like models and wearable prototypes
Technical Specifications
Technical data for LOCTITE 3D MED414| Resin Type | Medical |
|---|
| Shore Hardness | 51A |
|---|
| Viscosity | 1600-3000 mPa·s |
|---|
| Solid Density | 1.02 g/cm³ |
|---|
| Colour Options | Blue, Clear, Red |
|---|
| Tensile Stress at Break | 4-5 MPa MPa |
|---|
| Tensile Strength | 2.5-2.8 MPa |
|---|
| Young's Modulus | 9-15 MPa |
|---|
| Elongation at Break | 220-240% |
|---|
| Flexural Modulus | MPa |
|---|
| Izod Impact (Notched) | J/m |
|---|
| Price | $399.00 |
|---|
Handling & Printing Notes
With a viscosity of 1,600 mPa·s, this resin benefits from pre-warming and longer drain times after printing. The solid density of 1.02 g/cm³ is typical for photopolymer resins, resulting in lighter cured parts. Always refer to the official technical datasheet from Loctite (Henkel) for recommended print settings, exposure times, and post-curing instructions.
Similar Resins to Consider
Frequently Asked Questions
What is LOCTITE 3D MED414 used for?
LOCTITE 3D MED414 is primarily suited for flexible/rubber-like applications. Its 51A Shore hardness means it is rubber-like, making it a good choice for demanding 3D printing applications and is available in Blue, Clear, Red.
How much does LOCTITE 3D MED414 cost?
LOCTITE 3D MED414 is priced at approximately $399.00. Check Loctite (Henkel)'s website or authorised retailers for current pricing and availability.
What shore hardness is LOCTITE 3D MED414?
LOCTITE 3D MED414 has a shore hardness of 51A, which classifies it as rubber-like compared to most other resins.
← Browse all resins |
All resins from Loctite (Henkel) →