LOCTITE 3D PRO417
Manufacturer: Loctite (Henkel)
Type: Prototyping
LOCTITE 3D PRO417 is a Prototyping resin manufactured by Loctite (Henkel), industrial-grade 3D printing resins from Henkel's Loctite brand for engineering applications. With tensile stress at yield of 33 MPa, and 94% elongation at break, this resin is designed for applications requiring tough, impact-resistant applications. available in Black, priced at approximately $149.00.
Key Properties
- Tensile Strength: 33 MPa at yield — low tensile strength
- Elongation at Break: 94% — stretches significantly before breaking — flexible
- Viscosity: 1,700 mPa·s — high — benefits from pre-warming and longer drain times
- Impact Resistance: 52 J/m — good impact toughness
Best Applications for LOCTITE 3D PRO417
- Flexible and impact-resistant parts
- Snap-fit components and living hinges
- Tough enclosures, protective covers, and impact-resistant parts
Technical Specifications
Technical data for LOCTITE 3D PRO417| Resin Type | Prototyping |
|---|
| Shore Hardness | 71-75D |
|---|
| Viscosity | 1700-2200 mPa·s |
|---|
| Solid Density | 1.12 g/cm³ |
|---|
| Colour Options | Black |
|---|
| Tensile Stress at Yield | 33-38 MPa |
|---|
| Tensile Stress at Break | 40 MPa MPa |
|---|
| Tensile Strength | 38-40 MPa |
|---|
| Young's Modulus | 1212-1384 MPa |
|---|
| Elongation at Break | 94-105% |
|---|
| Flexural Modulus | 844-952 MPa |
|---|
| Izod Impact (Notched) | 52-54 J/m |
|---|
| Price | $149.00 |
|---|
Handling & Printing Notes
With a viscosity of 1,700 mPa·s, this resin benefits from pre-warming and longer drain times after printing. The solid density of 1.12 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from Loctite (Henkel) for recommended print settings, exposure times, and post-curing instructions.
Similar Resins to Consider
Frequently Asked Questions
What is LOCTITE 3D PRO417 used for?
LOCTITE 3D PRO417 is primarily suited for tough, impact-resistant applications. making it a good choice for demanding 3D printing applications and is available in Black.
How much does LOCTITE 3D PRO417 cost?
LOCTITE 3D PRO417 is priced at approximately $149.00. Check Loctite (Henkel)'s website or authorised retailers for current pricing and availability.
← Browse all resins |
All resins from Loctite (Henkel) →