FR940
Manufacturer: Phrozen
Type: High Temp Resin
FR940 is a High Temp Resin resin manufactured by Phrozen, high-performance 3D printing solutions with focus on speed and precision. With 3.8% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. priced at approximately $113.74.
Key Properties
- Elongation at Break: 3.8% — minimal stretch — rigid
- Viscosity: 180 mPa·s — low — easy to pour and clean
- Impact Resistance: 30.7 J/m — moderate impact toughness
Best Applications for FR940
- General-purpose SLA/MSLA 3D printing projects
- Rapid prototyping and modelling
Technical Specifications
Technical data for FR940| Resin Type | High Temp Resin |
|---|
| Shore Hardness | 75-80D |
|---|
| Viscosity | 180-285 mPa·s |
|---|
| Solid Density | 1.1 g/cm³ |
|---|
| Tensile Strength | 28.5 MPa |
|---|
| Young's Modulus | 1812 MPa |
|---|
| Elongation at Break | 3.8% |
|---|
| Flexural Modulus | 1557.4 MPa |
|---|
| Flexural Strength | 38.5 MPa |
|---|
| Izod Impact (Notched) | 30.7 J/m |
|---|
| Price | $113.74 |
|---|
Handling & Printing Notes
With a viscosity of 180 mPa·s, this resin pours easily and requires minimal heating. The solid density of 1.1 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from Phrozen for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About Phrozen
High-performance 3D printing solutions with focus on speed and precision. Known for large-format printers and specialty resins.
Headquarters: Hsinchu, Taiwan
View all resins from Phrozen →
Frequently Asked Questions
What is FR940 used for?
FR940 is primarily suited for general-purpose 3D printing. making it a good choice for demanding 3D printing applications.
How much does FR940 cost?
FR940 is priced at approximately $113.74. Check Phrozen's website or authorised retailers for current pricing and availability.
← Browse all resins |
All resins from Phrozen →