CL-TH
Manufacturer: Resione
Type: Tough Wear-Resistant
CL-TH is a Tough Wear-Resistant resin manufactured by Resione. With 19.7% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. priced at approximately €59.00.
Key Properties
- Elongation at Break: 19.7% — moderate flexibility
- Viscosity: 847 mPa·s — medium-high — may benefit from slight warming before use
- Impact Resistance: 17 J/m — low impact toughness
Best Applications for CL-TH
- General-purpose SLA/MSLA 3D printing projects
- Rapid prototyping and modelling
Technical Specifications
Technical data for CL-TH| Resin Type | Tough Wear-Resistant |
|---|
| Shore Hardness | 82-85D |
|---|
| Viscosity | 847 mPa·s |
|---|
| Solid Density | 1.205 g/cm³ |
|---|
| Tensile Strength | 32-44 MPa |
|---|
| Young's Modulus | 1070-1670 MPa |
|---|
| Elongation at Break | 19.7-28% |
|---|
| Flexural Modulus | 1940-2060 MPa |
|---|
| Flexural Strength | 55-65 MPa |
|---|
| Izod Impact (Notched) | 17-18.8 J/m |
|---|
| Price | €59.00 |
|---|
Handling & Printing Notes
With a viscosity of 847 mPa·s, this resin may benefit from slight warming before use in colder environments. The solid density of 1.205 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from Resione for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About Resione
Resione manufactures a range of affordable photopolymer 3D printing resins including engineering, dental, and jewelry types.
Headquarters: China
View all resins from Resione →
Frequently Asked Questions
What is CL-TH used for?
CL-TH is primarily suited for general-purpose 3D printing. making it a good choice for demanding 3D printing applications.
How much does CL-TH cost?
CL-TH is priced at approximately €59.00. Check Resione's website or authorised retailers for current pricing and availability.
← Browse all resins |
All resins from Resione →