D01
Manufacturer: Resione
Type: Dental Model
D01 is a Dental Model resin manufactured by Resione. With 6% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. available in Yellow-Orange, priced at approximately $59.00.
Key Properties
- Elongation at Break: 6% — minimal stretch — rigid
- Viscosity: 300 mPa·s — medium — flows well at room temperature
- Impact Resistance: 14.9 J/m — low impact toughness
Best Applications for D01
- General-purpose SLA/MSLA 3D printing projects
- Rapid prototyping and modelling
Technical Specifications
Technical data for D01| Resin Type | Dental Model |
|---|
| Shore Hardness | 85-90D |
|---|
| Viscosity | 300 mPa·s |
|---|
| Solid Density | 1.2 g/cm³ |
|---|
| Colour Options | Yellow-Orange |
|---|
| Tensile Strength | 41 MPa |
|---|
| Young's Modulus | 1540 MPa |
|---|
| Elongation at Break | 6% |
|---|
| Flexural Modulus | 2100 MPa |
|---|
| Flexural Strength | 73.6 MPa |
|---|
| Izod Impact (Notched) | 14.9 J/m |
|---|
| Price | $59.00 |
|---|
Handling & Printing Notes
With a viscosity of 300 mPa·s, this resin flows well at room temperature. The solid density of 1.2 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from Resione for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About Resione
Resione manufactures a range of affordable photopolymer 3D printing resins including engineering, dental, and jewelry types.
Headquarters: China
View all resins from Resione →
Frequently Asked Questions
What is D01 used for?
D01 is primarily suited for general-purpose 3D printing. making it a good choice for demanding 3D printing applications and is available in Yellow-Orange.
How much does D01 cost?
D01 is priced at approximately $59.00. Check Resione's website or authorised retailers for current pricing and availability.
← Browse all resins |
All resins from Resione →