FabPro Flexible BLK
Manufacturer: 3D Systems
Type: Flexible
FabPro Flexible BLK is a Flexible resin manufactured by 3D Systems, pioneer of 3D printing (founder Chuck Hull, inventor of SLA) based in Rock Hill, SC. With 93% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. priced at approximately €219.00.
Key Properties
- Elongation at Break: 93% — stretches significantly before breaking — flexible
Best Applications for FabPro Flexible BLK
- Flexible and impact-resistant parts
- Snap-fit components and living hinges
Technical Specifications
Technical data for FabPro Flexible BLK| Resin Type | Flexible |
|---|
| Shore Hardness | Shore D 76 |
|---|
| Solid Density | 1.15 g/cm³ g/cm³ |
|---|
| Tensile Strength | 41 MPa MPa |
|---|
| Young's Modulus | 1330 MPa MPa |
|---|
| Elongation at Break | 93%% |
|---|
| Flexural Modulus | 1120 MPa MPa |
|---|
| Flexural Strength | 41 MPa MPa |
|---|
| Price | €219.00 |
|---|
Handling & Printing Notes
The solid density of 1.15 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from 3D Systems for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About 3D Systems
Pioneer of 3D printing (founder Chuck Hull, inventor of SLA) based in Rock Hill, SC. Its industrial Figure 4, ProJet/VisiJet and Accura material lines cover prototyping and production.
Headquarters: Rock Hill, SC, USA
View all resins from 3D Systems →
Frequently Asked Questions
What is FabPro Flexible BLK used for?
FabPro Flexible BLK is primarily suited for general-purpose 3D printing. making it a good choice for demanding 3D printing applications.
How much does FabPro Flexible BLK cost?
FabPro Flexible BLK is priced at approximately €219.00. Check 3D Systems's website or authorised retailers for current pricing and availability.
← Browse all resins |
All resins from 3D Systems →